Bosch FAP-OC 500Series Інформація про продукт - Сторінка 10

Product Information 500 Series LSN Fire Detectors (EU)

1.5. Performance Features

D Fulfills the highest aesthetic demands through the flush−mounting design and the

possibility of color toning

D Smooth, easily−cleaned detector surface

D Quick and easy insertion and exchange of the detector thanks to innovative

detector locking mechanism (click and lock principle).

D Easily−visible two−color LED for display of alarm, trouble and test mode

D Self−monitoring of the sensors, with display on the fire panel:

− Fault indication upon failure of the evaluation electronics or one of the LEDs of

the optical sensor

− Three−stage contamination display (analog value can be read out at service)

− Fault indication in the case of heavy contamination (instead of false alarm)

− Fault indication in the case of CO sensor failure (for the FAP−OC 500)

D Thanks to integrated isolators, the LSN loop will continue to function in case of wire

interruption or short−circuit of a detector

D Active adjustment of the threshold (drift compensation) if the optical sensor be-

comes contaminated

D Active adjustment of the threshold (drift compensation) of the chemical sensor

D Increased detection and false alarm immunity thanks to evaluation of the time

behavior of fire and disturbance variables

D Programmable sensitivity, i.e. can be adjusted to the area of operation

D Detector individual identification on the fire panel in the case of alarm

D A pre−alarm is signaled when 50% of alarm threshold is reached (indicator in the

event database of the fire panel).

D The serial number, contamination level, operating hours and current analog values

can be read out from each configured detector.

D Activation of an external detector alarm display is possible (not for relay bases)

D Activation of external devices with relay base is possible (only in combination with

the Modular Fire Panel FPA−5000)

D Easily−accessible connection terminals

D Service accessories for simple and comfortable detector test and exchange

D When using the FAA−500−TTL test adapter, an integrated reed switch automati-

cally switches the detector into the test mode.

D The EMC security fulfills the guidelines according to VdS 2110 (VdS Schaden-

verhütung GmbH) as well as UL 268.

D Can be connected to the LSN fire panels FPA−5000, BZ 500 LSN, UEZ 2000 LSN,

UGM 2020 and to other fire panels or their receiver modules with identical connec-

tion conditions.

D VdS Approval

D CE conform according to EN 54−7

Page 10

PI − 34.70 en

BDL−F.01U.025.876

A5.en/ 02.02.2006

ST−FIR/PRM1 / zab