Dragonfly Acoustiweave DF-SL-100-AW Інструкція зі збирання/встановлення

Переглянути онлайн або завантажити pdf Інструкція зі збирання/встановлення для Проекційний екран Dragonfly Acoustiweave DF-SL-100-AW. Dragonfly Acoustiweave DF-SL-100-AW 2 сторінки. Fixed film screen with black velvet frame

Друкувати сторінку

• The screen is equipped with a set of mounting brackets. Align

the brackets according to the diagram below, measuring

from the outside edge of each bracket. Drill two holes for

each bracket. Insert 5x40mm screws for a studded wall, or

5x40mm screws + anchors for drywall/concrete without studs,

and hang. The screen should sit centered on the mounting

brackets when installed. Set the resting pin of the sliding

frame connectors, located on the inside of the frame, to the

bracket's pin slot. Thread two screws through each bracket

and sliding frame connector.

• Drywall/Stud Installation: Using a stud finder, locate studs in

wall. Hang top bracket first (subtracting 1/2" from top of

screen to mark corner edge of top of bracket) with 5X40mm

Philips head screws and washers directly into studs. Pre-

drilling studs with a 5/32" drill bit is recommended.

• Concrete Installation: Hang top bracket first (subtracting 1/2"

from top of screen to mark corner edge of top of bracket).

Pre-drill 3 holes into concrete with 1/4" concrete bit and insert

concrete anchors. Position top bracket over holes and insert

5X40mm Philips head screws and washers.

48"

85.75"

Black Acoustically Transparent Material (Optional installation)

Black acoustically transparent material is for the Acoustiweave™

screen only.

• Light reflection can be an issue with any acoustically

transparent material. If painting reflective surfaces is not

an option to control light reflection, an acoustically

transparent black fabric has been included. Simply hang

the fabric directly behind the screen in any manner that

fits your installation.

DF-SL-160-MW/HC

160"

78.53"

139.54"

86.4"

147.3"

Care and cleaning

• Your new screen can be effectively cleaned with a soft cloth

using mild soap and water. DO NOT use harsh detergents,

chemicals, distilled spirits or petro-chemicals to clean the

screen; doing so may result in severe damage to the screen or

the frame coating.

• If the felt covering on the frame gets dusty or covered with

lint, use a household vacuum cleaner with a brush or furniture

cleaning attachment to clean the felt. We do not recommend

using excessive amounts of water on the felt.

Fixed Film Screen with Black Velvet Frame

85.75"

Assembly

Installation

Instructions