Advanced Elements AdvancedFrame AE1007 Посібник користувача - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник користувача для Човен. Advanced Elements AdvancedFrame AE1007. Advanced Elements AdvancedFrame AE1007 20 сторінок. 1 or 2 convertible inflatable kayak
Друкувати сторінку
provide enough pressure to fully inflate the kayak, so you will need a secondary pump to finish
the job.
Using the NEW "Screw-on" Spring Valve Adaptor:
The screw-on Spring Valve Adaptor was designed to enable the pump hose to securely connect to
the Advanced Elements Spring Valve without falling off during inflation, making inflation easier.
The valve adaptor also has a semi-circle protrusion that depresses the valve stem, opening the
valve slightly to allow pumps with pressure gauges to take a constant reading. When inflating
the kayak using the Spring Valve Adaptor, the valve should be in the inflate position.
Special Note: The Spring Valve Adaptor comes with all current Advanced Elements pumps,
with the exception of the 12v inflator, and will attach to any Advanced Elements pump that
does not have the adaptor already included, with the exception of the 12v inflator. The Spring
Valve Adaptor will also attach to some other manufacturer's pumps, but you must check the
attachment style at the end of the pump hose to be sure it will fit.
To begin inflating your kayak, you will need a Bellows Foot Pump or a Double Action Hand
Pump. Never use compressors, CO2 or compressed air as they may damage your kayak.
AdvancedFrame™ Convertible Inflatable Kayak Owner's Manual
Figure 1. Inflate/Deflate Spring Valve
OPERATING THE "TWIST" VALVES
TWIST TO OPEN / INFLATE / THEN CLOSE
1
PUMP HOSE
2
Figure 2. Inflate/Deflate Twist Valve
INSERT
TWIST VALVE
9