Advanced Elements AdvancedFrame AE1007-E Посібник користувача - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник користувача для Човен. Advanced Elements AdvancedFrame AE1007-E. Advanced Elements AdvancedFrame AE1007-E 20 сторінок. Convertible elite, 1 or 2 person kayak
Друкувати сторінку
STAGE 2
Inflating Main Chamber 2:
1. Moving to Main Chamber 2 on the inside of kayak, check to be sure that the valve plunger is
UP or in the INFLATE position (See Figure 1) and inflate until firm to touch (2.0 psi ONLY).
2. Inflation of Main Chamber 2 is complete. Secure the black cap on the valve.
STAGE 3
Inflating The Floor and Smaller Air Chambers:
1. Inflate Chamber 3 "floor" using the adaptor included in the Repair Kit. (4.0 psi - 6.0 psi MAX)
2. Inflate chamber 4 (thwart/foot brace) until firm. (1.0 psi ONLY). Attach to Velcro on side
tubes when paddling tandem. Remove or move the thwart/foot brace when paddling solo.
3. Inflate chamber 5 & 6 for desired deck lift. (1.0 psi ONLY)
4. Make sure all valves are closed tightly and properly.
5. Finally, insert plastic Bow and Stern Forms into the grey pockets on the bow and stern of the
kayak. (See Figure 3).
INFLATION TIPS
CO2, OR COMPRESSED AIR AS THEY MAY DAMAGE YOUR KAYAK. The main chambers use
high-end military style, plunger valves (Push in and twist to activate the spring-loaded check
valve for inflating, or push-in and twist to lock open for deflating).
3.4
Over Inflation and Temperature Regulation:
CAUTION:
weather and water your kayak will lose some pressure. If this occurs, you may want to add a
bit more air to the kayak to improve performance. In hot weather or prolonged sunlight, the air
inside the kayak will expand. You must let some air out of the appropriate chambers to prevent
the kayak from failing due to overpressure. You should avoid exposing your kayak to extreme
temperatures (hot or cold).
Figure 3. Plastic Bow and Stern Insert
®
NEVER USE COMPRESSORS,
11