Electrolux # Посібник з використання та догляду - Сторінка 10

Surface Cookin

PLACEMENTOF BURNERHEADSAND CAPS

[]

For the 18 000 BTU burner :

Place the burner head over the gas orifice (Figure

1). Be careful

not to damage

the electrode

while placing the burner head over the orifice.

Make sure electrode fits correctly into slot in burner

head.

Figure1

Burner

Head

Figure2

For all burners

Place a burner cap on each burner head (see Figure

2), matching the cap size to the head size. The cap

for each burner has an inner locating ring which

centers the cap correctly on the burner head. Be

sure that all the burner caps and burner heads are

correctly placed BEFORE using your appliance.

Make sure each burner cap is properly aligned

and level.

Turn the burner on to determine if it will light. If the

burner does not light, contact a Service Center. Do

not service the sealed burner yourself.

PLACEMENTOF BURNERGRATES

[]

Place grates on the Ceramic Glass Cooktop. Be sure they are right located

inside the stainless steel frame.

ATTENTION: Do not slide the grates on the stainless steel frame, doing so

can damage the surface.