DRAKE PEG PLUS Посібник з швидкого налаштування - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Конвертер мультимедіа DRAKE PEG PLUS. DRAKE PEG PLUS 8 сторінок. Public educational & governmental access encoder
Друкувати сторінку
Status Tab
The status tab provides the following information (View only):
1
2
3
4
5
6
1
The serial number indicates serial number of PEG PLUS encoder
2
The hardware version indicates the hardware version of the PEG PLUS encoder
3
Indicates the software version of the unit
4
Indicates user-defined unit constants (Name and Location)
5
The Up-Time of the unit expressed in days, hours, minutes, and seconds.
To set system time you will need to set the IP address of your local DNS server by configuring DNS Mode to
"manual" under the DNS settings in the System Configuration tab. The encoder will then resolve the standard NTP
server pool DNS entry and sync the system time.
Input Status Box:
6
Video Lock: Indicates if the video is present and locked
Resolution: Indicates the resolution of the source video. The PEG encoder supports resolutions of:
Embedded Audio: Indicates if there is embedded audio on the stream
480i (640x480/720x480 @ 30FPS)
720p (1280x720 @ 60FPS)
1080i (1920x1080 @ 30FPS)
www.rldrake.com
937.746.4556 |
3