DRAKE FMC 1000 Інструкція з експлуатації - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Модулятор DRAKE FMC 1000. DRAKE FMC 1000 14 сторінок. Fm stereo modulator
Друкувати сторінку
vi
Specifications
SPECIFICATIONS -
Frequency Coverage:
Frequency Selection:
Frequency Generation:
Frequency Stability:
Tuning Step Size:
Modulation:
FM Deviation:
Pre-Emphasis:
Output Level:
Output Impedance:
Audio Inputs-
Stereo:
Mono:
Audio Input Level for
75 kHz Peak Deviation-
XLR Connectors:
RCA Phono Connectors:
Frequency Response:
Total Harmonic Distortion:
88.1 to 107.9 MHz.
Selectable by front panel
buttons and LCD
/
frequency readout.
PLL Synthesis.
±10 ppm, 0
0
to 50
0
C.
100 kHz.
FM, 200KF8E, multiplex
stereo.
±75 kHz, maximum.
75 µSec.
+50 dBmV, nominal
(adjustable +40 to +50 dBmV
with rear panel accessible
level control).
75 Ohms.
2 XLR (left and right audio),
2 RCA Phono
(left and right audio).
Use Left XLR or Left RCA
Phono input.
20K Ohm input impedance,
balanced.
-10 to +10 dBu manual gain
adjustment with front panel
modulation indicators.
20K Ohm input impedance,
balanced.
-16 to +4 dBu manual gain
adjustment with front panel
modulation indicators.
20 Hz to 15 kHz, ±3 dB
referenced to a standard
75 µSec. pre-emphasis
curve.
Less than 0.25%, typical.
Power Requirement:
12 VDC @ 250 mA,
regulated by supplied wall
AC Adapter.
Size:
19" W x 1.75" H x 6.25" D.
Weight:
5 lbs.
Front Panel:
LCD Display of Frequency
and Mode, TUNE
buttons, Input Level Control
with (Over) Modulation
Indicators, Monitor output
with Monitor Level Control.
Rear Panel:
Qty (2) XLR connectors (Left
and Right Balanced Audio
Input) with GROUND LIFT
Switch, Qty (2) RCA Phono
Connectors (Left and Right
Unbalanced Audio Input),
Use Left Audio Inputs for
Monaural audio input,
Limiting/Compression switch,
DC Power Input with Power
On/Off Switch, and External
Antenna connector.
/