Bosch 2 Посібник з експлуатації та інструкція з монтажу - Сторінка 29

Друкувати сторінку

Bosch 2 Посібник з експлуатації та інструкція з монтажу

Hose and cable lengths

Left-hand connection

Right-hand connection

Tip:

The following are available from

specialist retailers/our after-sales

service:

Extension for the AquaStop and cold

■

water supply hose (approx. 2.50 m).

Order no. WMZ2380, WZ10130,

Z7070X0

A longer supply hose (approx. 2.20

■

m) for standard models. Individual

component number for the after-

sales service: 00353925

Water connection

Warning

Risk of death!

There is a risk of electric shock if live

components are touched.

Positioning and connecting

Do not immerse the AquaStop safety

valve in water (it contains an electric

valve).

Caution!

Water damage

The connection points for the water

supply hose and water drain hose are

under high water pressure. To prevent

leaks and water damage, you must

follow the instructions in this section.

Observe the following when connecting

the machine:

Notes

In addition to the information listed

■

here, the local water and electricity

supplier may have special

requirements.

Only operate the washing machine

■

using cold mains water.

Do not connect the washing

■

machine to the mixer tap of an

unpressurised hot-water boiler.

Do not use a used supply hose. Only

■

use the supply hose supplied or one

that was purchased from an

authorised specialist retailer.

If in doubt, have the appliance

■

connected by a technician.

Water inlet

Notes

Do not bend, squash, modify or cut

■

through the water supply hose

(otherwise its strength is no longer

guaranteed).

Only tighten the screw connection by

■

hand. If the screw connections are

tightened too much with a tool

(pliers), the thread may be

damaged.

Optimum water pressure in the supply

network

At least 100 kPa (1 bar)

Maximum 1000 kPa (10 bar)