Bosch Programme Table Інструкція з експлуатації - Сторінка 5

Друкувати сторінку

Bosch Programme Table Інструкція з експлуатації

Individual settings

Options buttons

The spin speed and temperature can be changed before and during the selected programme. The effects depend on

the programme progress.

(Temperature °C)

You can change the displayed washing temperature. The maximum washing temperature that can be selected depends

on the programme that has been set.

(Finished in)

When you select the programme, the relevant programme duration is displayed. You can delay the start of the programme

before it begins. The "Finished in" time can be set in increments of one hour up to a maximum of 24 hours. Press the

(Finished in) button repeatedly until the desired number of hours is displayed (h = hour). Press

(Spin speed in rpm) /

(Rinse hold = no final spin)

You can change the spin speed shown or select

final rinse, - - - appears in the display panel). You can change the spin speed shown. The maximum selectable spin

speed depends on the model and on which programme is currently selected.

Additional functions

and overview of programmes, page 7

Speed Perfect For washing in a shorter time with a washing result comparable to that of the standard pro-

gramme. Maximum load

For saving energy with a washing result comparable to that of the standard programme.

Eco Perfect

Special spin sequence with subsequent fluffing. Gentle final spin at reduced speed.

Reduced Ironing

Residual moisture in the laundry is increased slightly.

Aqua Plus

Additional rinse cycle. Increased water level. For areas with very soft water or for further

improving the washing result.

Childlock

You can lock the washing machine to prevent the functions you have set from being changed

in the display panel

inadvertently.

ON/OFF: after the start/end of the programme, press and hold

5 seconds.

Note: The childlock can remain activated until you wish to start the next programme, even after

switching off the machine.

Then you can deactivate the childlock before starting the programme and activate it again as

necessary once the programme has started.

Note:

– The

symbol is lit: Childlock active.

– The

symbol flashes: Childlock active and then the programme selector is altered.

To prevent the programme from stopping, turn the programme selector back to the original

programme, the

Add laundry

If you want to add additional items of laundry after the programme has started, press the

Start/Reload button. The machine checks whether adding laundry is possible.

in the display panel

are lit: Adding laundry is possible.

flashing: Wait until

Note: Only open the washing machine door when both the

: It is not possible to add laundry.

Note: for safety reasons, the washing machine door remains locked when the water level and/

or temperature is high, or during spinning.

To continue the programme, press the

Energy saving mode

If the washing machine is switched on and is not operated for several minutes before the programme starts or at the

end of the programme, the display panel light goes out and the

Press any button to turn the light back on.

(Rinse hold = no final spin, laundry remains in the water after the

Overview of programmes, page 7.

Start/Reload for approx.

symbol is lit again.

are lit.

symbols are lit.

Start/Reload button.

Start/Reload button flashes.

Individual settings

Signal

1. Activate the

setting mode for

signal volume

Start/Reload.

2. Set the

volume for .. .

Start/Reload

To start the programme or to subsequently load additional laundry, and to activate/deactivate the childlock.

•

1 step, the

Press and

Set to

display panel

hold

lights up

Button signals

Information signals

skip

Set the

1 step

volume*

* you may need to select the function several times

1 step,

release

•

Set to