Draper Envoy Інструкція з монтажу та експлуатації - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з монтажу та експлуатації для Проекційний екран Draper Envoy. Draper Envoy 3 сторінки. Electric projection screen
Також для Draper Envoy: Інструкція з монтажу та експлуатації (3 сторінок), Інструкція з монтажу та експлуатації (3 сторінок), Інструкція з монтажу та експлуатації (2 сторінок), Інструкція з монтажу та експлуатації (2 сторінок), Інструкція з монтажу та експлуатації (2 сторінок), Інструкція з монтажу та експлуатації (3 сторінок)

Друкувати сторінку
Draper Envoy Інструкція з монтажу та експлуатації
220V Envoy by Draper
Single Station Control
CE Approved
Junction box at
left end of screen
Internal Screen Wiring
Blue-220v (Common)
Brown-220v (Down)
Black-220v (Up)
Green/Yellow (Motor Ground)
Control
switch
Dashed wiring
by installer
220v,
50 Hz.
Please Note: Do not
wire motors in parallel.
Connecting Switch to Motor
with Internal Low Voltage Controller
INTERNAL SCREEN WIRING
Green/Yellow
(Motor Ground)
Brown (Down)
Black (Up)
Blue (Common)
GND
N
To
230 VAC
L1
Line
INTERNAL SCREEN WIRING
Blue (Common)
Black (Up)
Brown (Down)
Green/Yellow
(Motor Ground)
N
To
230 VAC
L1
Line
GND
Wiring Diagrams
Multiple Station Control
Junction box at
Not CE Approved
left end of screen
Internal Screen Wiring
Blue-220v (Common)
Brown-220v (Down)
Black-220v (Up)
Green/Yellow (Motor Ground)
Cap off with wire
nut & tape
Red
Blue
Black
Red
Blue
Black
Blue
Red
Black
Dashed wiring
by installer
220v, 50 Hz.
Data Cable Connection
MOTOR
DATA CABLE
Back of
Back of
Wall Switch
Wall Switch
OR
Built In LVC-IV - Single or Multiple
Dry Contacts
Projection Screen Wiring Diagram
MOTOR
DATA CABLE
Green/Yellow (Ground)
Red-to screen (directional)
Brown-to screen (directional)
White -Common to screen & 230V AC Neutral
Yellow-to 230V AC-Hot
Black-to 230V AC-Hot
Back of
Back of
Wall Switch
Wall Switch
Location of key
operated on-off
switch if furnished.
Dashed wiring by electrician
Low voltage wiring by others
External LVC-IV - Single or Multiple
Projection Screen Wiring Diagram
White-Common to screen & 230V AC Neutral
Red-to screen (directional)
Brown-to screen (directional)
Yellow-to 230V AC-Hot
Black-to 230V AC-Hot
Green/Yellow (Ground)
Location of key
operated 0n-off
switch if furnished.
Dashed wiring by electrician
Low voltage wiring by others
www.draperinc.com
220V Motor and Quiet Motor
with Built-in Low Voltage Controller
Single Station Control
CE Approved
Junction box at
left end of screen
Internal Screen Wiring
Blue-220v (Common)
Brown-220v (Down)
Black-220v (Up)
Green (Motor Ground)
Data Cable
220v,
50 Hz.
Data Cable Connection
Dashed wiring
Wall Switch,
by installer
RF or IR
Receiver,
or integrated
MOTOR
control system
DATA CABLE
Back of
Back of
Wall Switch
Wall Switch
Data Cables to
switches or
to additional motors
Please Note: This Splitter/Jack
is located inside the junction
box of your Access screen.
OR
Dry Contacts
MOTOR
DATA CABLE
Please Note: This Splitter/Jack
is located inside the junction
box of your Access screen.
Back of
Back of
Wall Switch
Wall Switch
Receiver
Button
Please Note: 5V DC must
be connected to set limits
using the wall switch.
Receiver
Button
(765) 987-7999
Multiple Station Control
Junction box at
left end of screen
Data Cable Connection
Data
Cables
MOTOR
DATA CABLE
220v, 50 Hz.
Back of
Back of
Wall Switch
Wall Switch
Wall Switches,
RF or IR
Data Cables to
Receivers,
switches or
to additional motors
or integrated
Please Note: This Splitter/Jack
control systems
is located inside the junction
box of your Access screen.
OR
Dry Contacts
MOTOR
DATA CABLE
Back of
Back of
Wall Switch
Wall Switch
Please Note: 5V DC must
be connected to set limits
3 Button Wall Switch
DOWN - Black
Please Note: 5V DC must
COM - White
be connected to set limits
UP - Red
using the wall switch.
Electrically Straight
Data Cable to more
LVC-IV modules*
RS232/485
Inputs/Outputs
Low Voltage
Trigger
*A maximum of six (6)
3-28 VDC
LVC-IV modules can be
linked together.
IR Eye Input
3 Button Wall Switch
DOWN - Black
COM - White
UP - Red
Electrically Straight
Data Cable to more
LVC-IV modules*
RS232/485
Inputs/Outputs
Low Voltage
Trigger
*A maximum of six (6)
3-28 VDC
LVC-IV modules can be
linked together.
IR Eye Input
Page 3 of 3
Not CE Approved
Internal Screen Wiring
Blue-220v (Common)
Brown-220v (Down)
Black-220v (Up)
Green (Motor Ground)
Data Cables to
switches or
to additional motors
using the wall switch.
Wall Switch
Wall Switch