BCN3D Sigma Series Посібник із швидкого старту - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для 3D-принтери BCN3D Sigma Series. BCN3D Sigma Series 2 сторінки.
Також для BCN3D Sigma Series: Посібник із швидкого старту (2 сторінок), Посібник із швидкого старту (2 сторінок)
Друкувати сторінку
Install teflon tubes
• Take the teflon tubes, coupling clips, and flat cable clips from the accessories box.
• Move the X axis rail manually towards the front in order to work more comfortably.
• Insert the teflon tube in the extruder connector behind the printer until it stops.
• Insert the opposite end of the tube into the hotend connector until it stops.
• Slide the black coupling clips under the grey connectors.
• Attach the teflon tube to the flat cable using the flat cable clips.
3. Using the printer
The BCN3D Sigma Series can be used online or offline. However connecting the printer to the
network is needed in order to register it and to use the BCN3D Cloud functionality.
Online
Ethernet
• Take the ethernet cable out from the
accessories box.
• Connect the ethernet cable to the
ethernet port at the back of the printer.
• Connect the other end of the cable to a
network source.
Wifi
• Find the USB WiFi Dongle in the
accessories box.
• Plug the USB WiFi Dongle into the USB
port at the back of the printer.
Turn on the printer
• Take the power cable out from the accessories box.
• Connect the power cable to the power socket at the back of the printer.
• Plug the other end of the cable into a wall outlet.
• Turn the printer on. The power switch is found on the left side of the printer.
Getting started
Scan the QR code to be guided through the Setup Assistant for network connectivity, loading
filament and calibrating your printer.
Diagram
2
9
8
10
7
6
5
3
4
1.
Teflon tube
7.
2.
Purge Tank
8.
3.
SD card reader
9.
4.
Touchscreen
10. Aluminium plate
5.
Filament entry
11.
6.
Spool holder
12. Power socket
Offline
SD Card
• Find the SD Card in the tool box.
• Insert the SD Card into the SD Card slot at
the front of the printer.
1
18
16
17
13
14
13. USB port
Filament spool
14. Ethernet port
Hotend
15. External filament spool
Glass build plate
16. External spool holder
Power switch
17. Filament Runout Sensor (FRS)
18. Extruder
1
15
11
12
Information
If you have the option, we
1
recommend using the printer with
an Ethernet connection as it is more
stable than Wifi.
Getting started
Setup Assistant
Watch our video to see
how to run the Setup
Assistant
What is in the box?
•
BCN3D Sigma Series with 0.4mm
hotends
•
Glass build plate
•
2 PLA spools
•
2 Spool holders
•
Quick start guide
•
SD card
•
Ethernet cable
•
USB cable
•
Spatula
•
3 Allen keys
•
Pliers
•
10 Hotend shims
•
USB Wifi dongle
•
Power cable
•
Nylon cleaning filament
•
Calibration gauge
•
Magigoo glue stick
•
Sample part
•
3 plastic covers
•
10 Thumbscrews
•
2 Teflon tubes
•
4 Flat cable clips
•
4 Coupling clips
BCN3D Technical
Assistance Services
If you do not find a solution to your
problem in this manual, please contact
the BCN3D technical support team
through Contact Support.