Draper 15225 Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для Електроінструмент Draper 15225. Draper 15225 16 сторінок. 2000w 230v hot air gun
Також для Draper 15225: Інструкція з експлуатації (16 сторінок)

Друкувати сторінку

BASIC HEAT GUN OPERATIONS

8.1 SAFETY SWITCH – FIG.1

The ON/OFF switch (2) has four positions/settings.

Position 0 is off.

Position 1 is "cool heat" which is a steady 50°C heat

(approx.) at 500 L/min.

Position 2 is heat approximately 450°C (approx.) at

250 L/min.

Position 3 is heat approximately 600°C (approx.) at

500 L/min.

8.2 FREESTANDING OPERATION –

FIG.2

This heat gun can be positioned freestanding. This

allows the user to have both hands free which is

essential for certain applications, e.g. pipe bending,

plastic welding, etc. Position the heat gun on it's end,

only on a level suitable surface.

Note: Never leave the heat gun unattended or

switched on.

The following instructions on next page should only be

used as a guide as the ideal temperature should be

ascertained by performing a test on the workpiece.

Heating efficiency will vary depending on the

properties of the workpiece, and the distance kept

between the metal nozzle and the workpiece itself.

FIG.1

FIG.2

- 11 -

(2)