Draper BR15A Інструкція з експлуатації - Сторінка 12

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент Draper BR15A. Draper BR15A 20 сторінок. 1600w 115v 15kg

OPERATING INSTRUCTIONS

IMPORTANT: Make sure that the mains

voltage matches the voltage stated on the

machines rating plate.

9.1 SWITCH OPERATION - FIG. 5

The trigger switch

on this tool is fitted

with a locking device,

, allowing the

tool to be operated for longer periods of

time without interruptions. The machine will

now continue to run until trigger

pressed, automatically releasing locking

button

Before inserting the plug into the socket,

check that the switch is in the unlocked

position. When the tool is not to be used for

FIG.5

long periods, remember to leave the switch

device in the unlocked position.

You will only achieve good results if you

use sharp chisels. You should therefore

sharpen the chisels promptly to ensure that

they produce good results and provide a

long service life.

Important: You only require slight contact

pressure for chiselling. Excessive contact

pressure will place an unnecessary strain on

the motor. Check the chisels at regular

intervals. Sharpen or replace blunt chisels.