Draper CIW12VD Оригінальна інструкція з експлуатації - Сторінка 15

Переглянути онлайн або завантажити pdf Оригінальна інструкція з експлуатації для Електроінструмент Draper CIW12VD. Draper CIW12VD 20 сторінок.

8.6 OPERATION

Proper fastening torque is determined by the kind

of fastening, the size of the fastening or the

material or workpiece.

–

It is advisable to perform a test operation to

determine the proper fastening time for the

fastening you are using.

–

Hold the wrench in straight alignment to the

fastening.

–

Depress the wrench and use for the required

amount of time.

–

After fastening, always check the torque with

an appropriate torque wrench.

Note: Do not use this tool to install wheel nuts on

wheels without a torque limiting device. Doing so

could result in galled or broken nuts.

Note: Using a universal joint or extension bar may

reduce the fastening force of the impact wrench

and require longer fastening time.

Note: Using an impact wrench creates heat. The

metal housing at the front of the wrench will

become hot. In certain circumstances, the force

required to tighten or remove fixings may cause

the fixings themselves to become very hot! Wear

suitable gloves to prevent burns.

– 15 –