Draper 20849 Інструкція з експлуатації - Сторінка 14

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Дриль. Draper 20849. Draper 20849 20 сторінок. Twin pack 10.8v li-ion cordless rotary drill & impact driver

Друкувати сторінку

BASIC CORDLESS IMPACT DRIVER OPERATIONS

9.1 INSTALLING AND REMOVING BITS - FIG. 10

This driver is supplied with a ¼" Female Hex.

Pull and hold the quick release collet

insert and to release the bit.

NOTE: This product is equipped with an electric brake.

Never use any bits or accessories that are not hardened

for impact use.

Never use steel sockets which can shatter and can cause

personal injury.

9.2 LED WORK LIGHT - FIG. 11

To aid working in confined, inadequately lit spaces, the

LED work light

trigger is activated.

9.3 FORWARD/REVERSE SELECTOR - FIG. 12

The switch determines the direction of rotation of the

collet, i.e. clockwise or anticlockwise.

Stop the drill and push switch

right.

NOTE: When the direction switch is pushed to the left,

the collet will rotate clockwise.

Before operation, check that the switch is set in the

required position. Do not change the direction of

rotation until the collet comes to a complete stop.

ii.

When the drill is not in use move the direction

switch to the neutral position (the middle setting)

to lock the trigger out.

9.4 TRIGGER

When the trigger is depressed, the chuck will rotate

(provided the direction switch is set in the forward or

reverse position). This trigger switch is electronic which

enables the user to vary the speed continuously. The

speed varies according to how far the trigger switch is

depressed. The further it is depressed, the faster the

chuck will rotate. The lighter it is depressed, the slower

it will rotate.

automatically illuminates when the

outwards to

to the left or

FIG.10

FIG.11

FIG.12