Draper CHD96V Інструкція з експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Дриль. Draper CHD96V. Draper CHD96V 13 сторінок.

CHD96V - CHD14V2

CHD142V Plus - CHD182V Plus

WARNING: Please ensure the Battery Pack

is installed correctly before charging.

✲✌

✳✌

✪✌ TRIGGER - When the variable speed trigger switch is depressed the chuck will

rotate (providing the direction switch is in a clockwise or anticlockwise position).

✫✌ FORWARD/REVERSE LEVER - This lever determines the direction of rotation of

the chuck, i.e. clockwise or anticlockwise.

✬✌ KEYLESS CHUCK - This is for holding tools, i.e. drill bits or screwdriver bits.

NOTE: Part No. CHD142VPLUS is fitted with auto spindle locking feature for easy

bit changing, also helps perforate through sheet steel easily if drill bit snags.

✭✌ RATING PLATE - Shows Part No., voltage, capacity, etc.

✮✌ TWO-SPEED GEARBOX SELECTOR SWITCH - This adjusts the rotation speed

range of the chuck via the two-speed gearbox. (NOTE: Only change gear when the

drill has completely stopped).

✯✌ BATTERY RELEASE - To release the battery pack, squeeze the grips located on

either side of the battery casing and carefully slide it out.

✰✌ BATTERY PACK - This is the drill's power supply.

✱✌ TORQUE CONTROL - There are 21 torque settings, settings 1-10 are normally

used for sensitive screwdriving. The 21st setting is for standard drilling

applications. (NOTE: CRD12V has 11 torque settings).

✲✌

BATTERY CHARGER - Charges the battery in approximately 1 hour.

✳✌ CHARGING INDICATOR - This will glow when the battery is charging.

✴✌ HAMMER SETTING - Select this setting for hammer drilling into

brickwork/masonry. (NOTE: CRD12V does not have this feature).

GETTING TO KNOW YOUR

CORDLESS DRILL/CHARGER

✬✌

✴✌

✱✌

✫✌

✪✌

- 7 -

✮✌

✭✌

✯✌

✰✌

FIG.B