Draper 30736 Інструкція з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Пила. Draper 30736. Draper 30736 16 сторінок. Horizontal and vertical metal cutting bandsaw

Друкувати сторінку

1. ASSEMBLING THE STAND (FIG.2)

Remove the legs ✪✌ & ✫✌ from the

packaging and open up. Attach shelf

✬✌ as shown using the fixing supplied.

There are a choice of holes but only the

2nd hole up can be used to fix the shelf.

Slide handle ✭✌ through the holes

provided and secure in place from the

back with the pins supplied. Finally

attach the wheels ✮✌ on the bottom of

the other leg by bolting the axle with

the fixings supplied. The saw can now

be lifted onto the stand ( seek

assistance) and bolted securely using

the fixings supplied.

2. PULLEY COVER & BELT (Fig.3.)

The pulley cover ✯✌ can be slide into

position behind the pulleys and secured

in place using screws ✰✌. The belt ✱✌

can now be fitted and adjusted (see

page 7). When complete close the

pulley cover and fix with the screw

provided.

3.VERTICAL TABLE (Fig.4).

Lift the head into the upright position,

remove the 2 countersunk screws ✲✌.

Swap the small plate for the larger table

✳✌ and resecure the screws.

ASSEMBLY INSTRUCTIONS

✪✌

✮✌

FIG.2.

✱✌

✰✌

FIG.3.

✲✌

- 6 -

✫✌

✬✌

✭✌

✯✌

✳✌

FIG.4.