Draper BS190 Інструкція з експлуатації - Сторінка 10

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Пила. Draper BS190. Draper BS190 20 сторінок. Two wheel bandsaw
Також для Draper BS190: Інструкція з використання Посібник з використання (20 сторінок)

GETTING TO KNOW YOUR BANDSAW cont'd

2. UPPER SLIDE LOCK KNOB

The upper blade guide/guard assembly should

be adjusted so that it just clears the workpiece

whilst cutting. Always adjust the upper blade

guide assembly to suit the workpiece before

each operation, this is done by loosening the

upper slide lock knob, adjusting the height of

the guide and retightening. Fig.3.

3. WORKTABLE LOCK KNOBS

Loosening the knobs allows the worktable to be

tilted. The table can then be locked in the

required position by tightening the lock knobs.

Fig.4.

4. TILT (BEVEL) SCALE

A tilt scale is provided under the worktable as a

convenient reference for setting the approximate

table angle for bevel cutting.

NOTE: When greater accuracy is required, make

practice cuts and adjust the table as necessary.

Fig.5.

5. BLADE TENSION ADJUSTMENT KNOB

This knob controls the amount of blade tension.

Fig.6.

6. TRACKING ADJUSTMENT SET SCREW

Adjust this screw to centre the blade on the

wheels. Fig.7.

Fig.3.

Fig.4.

Fig.6.

- 10 -

Fig.5.

Fig.7.