Draper 57842 Інструкція з експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для М'ясорубка Draper 57842. Draper 57842 12 сторінок. 110v - 230v

Regular inspection and cleaning reduces the

necessity for maintenance operations and will

keep your tool in good working condition. The

tool bearings and gears are life-long lubricated.

The motor must be correctly ventilated during

tool operation. For this reason avoid blocking the

air inlets with hands. After use disconnect the tool

from the power supply and clean carefully, use

compressed air through ventilation slots.

DISPOSAL

At the end of the machine's working life, or when

it can no longer be repaired, ensure that it is

disposed of according to the standard regulations

of the country in which it is being used, and that

the disposal operation is carried out by

specialized personnel following authorized

guidelines.

In all circumstances:

- Do not abandon in the environment;

- Do not dispose of together with solid urban

waste products;

- Contact the special recycling centres.

WARNING

Disconnect the plug from the power supply socket

before replacing any parts.

MAINTENANCE &

PART REPLACEMENT

BRUSHES

The brushes must be replaced after approx. 150-

200 working hours, or if they are less than 5-6mm

in length.

WARNING

For correct tool operation always change the

brushes in pairs, not separately. The use of

original Draper spare parts is recommended.

After having fitted new brushes allow the motor to

run for at least five minutes without load for the

brushes to bed.

IMPORTANT:

This operation should only be performed by an

authorized person.

REPLACING THE POWER SUPPLY CABLE

Check that the power supply cable is in good

condition, if not have it replaced by an authorized

person.

- 7 -