Draper 53016 Інструкція з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Шліфувальна машина Draper 53016. Draper 53016 16 сторінок. 230v 1200w angle polisher

Друкувати сторінку

INTRODUCTION

4.1 SCOPE

This hand held power tool uses polishing mops and foam polishing sponges in order to finish

painted surfaces. Intended for DIY and light commercial use only. Any other application is

considered mis-use.

4.2 SPECIFICATION

Stock no ............................................................................................................................ 53016

Part no ............................................................................................................................ PT1200

Rated voltage: .........................................................................................................230V~50Hz

Rated input: .................................................................................................................... 1200W

Disc diameter............................................................................................................... 180mm

Speed (no load) .................................................................................................600-3300min-1

Rated capacity ............................................................................................................... 180mm

Spindle thread .................................................................................................................... M14

Sound pressure level ................................................................................................. 88.4dB(A)

Sound power level .................................................................................................... 99.4dB(A)

Vibration level ..............................................................................................................5.97m/s

Weight (nett)........................................................................................................................ 4kg

4.3 HANDLING & STORAGE

Although this machine is small in size, care must still be taken when handling and lifting.

Dropping this machine will have an effect on the accuracy and may also result in personal

injury. This machine is not a toy and must be respected.

The environment will have a negative result on its operation if you are not careful. If the air

is damp, components will rust. If the machine is unprotected from dust and debris;

components will become clogged: And if not cleaned and maintained correctly or regularly

the machine will not perform at its best.