Draper 57941 Посібник - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник для Шліфувальна машина Draper 57941. Draper 57941 16 сторінок. 230v 1/2 sheet sander

Друкувати сторінку

INTRODUCTION

4.1 SCOPE

This sander is intended for domestic and infrequent light trade use only.

As part of our core range, this product is suitable for enthusiasts and tradespeople alike. Any

application other than that it was intended for, is considered misuse.

4.2 SPECIFICATION

Stock No. ....................................................................................................................................... 57941

Part No. ..................................................................................................................................1/2S-300D

Motor:

Rated voltage ........................................................................................................................ 230V~

Rated frequency ...................................................................................................................... 50Hz

Rated input ............................................................................................................................ 300W

Revolutions per minute (no load) .................................................................................. 11,000min

Pad size...................................................................................................................225mm x 115mm

Sound pressure level (LpA)*: ............................................................................. 79dB(A), K=3 db(A)

Sound power level (LWA)**: ............................................................................... 90dB(A), K=3 db(A)

Uncertainty (K): .......................................................................................................................... 3dB(A)

Vibration level†: ..................................................................................................... 13.1m/s², K=1.5m/s

Weight (machine only).......................................................................................................... 2.315kg

†When sanding in wood.

4.3 HANDLING & STORAGE

– Care must be taken when handling this product.

● Dropping this power tool could have an effect on its accuracy and could also result in personal

injury. This product is not a toy and must be respected.

– Environmental conditions can have a detrimental effect on this product if neglected.

● Exposure to damp air can gradually corrode components.

● If the product is unprotected from dust and debris, components will become clogged.

● If not cleaned and maintained correctly or regularly, the machine will not perform at its best.

- 5 -

-1