Draw tite 24971 Інструкція з монтажу - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з монтажу для Автомобільні аксесуари Draw tite 24971. Draw tite 24971 4 сторінки. 2012-current toyota prius c
Друкувати сторінку1.
Remove Appearance Panel – Note: Panels may vary based on vehicle year. Using a flat head screwdriver remove (2) plastic appearance panels from the driver side. (4) push
pins per panel (8 push pins total). Then remove the (5) push pins from the center appearance panel. Finally remove the remaining (2) push pins attaching the fascia tabs.
NOTE: Return the center appearance panel and 5 push pins to the vehicle owner. All other panels and push pins will be reinstalled in step 6.
2.
Remove Bumper Bolts– Using a 12mm socket remove the lower bolt and
center bolt from the bumper (each side) and return to vehicle owner. NOTE:
Leave the outer bolts attached to the vehicle.
Leave
Remove
3.
Hitch installation – Rotate the passenger side of the hitch over the exhaust
and raise into position. Then install items j and k each side.