Drawmer CPA-50 Посібник оператора - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник оператора для Підсилювач Drawmer CPA-50. Drawmer CPA-50 12 сторінок.
Друкувати сторінкуDRAWMER
IF A FAULT DEVELOPS
For warranty service please call Drawmer Electronics
Ltd. or their nearest authorised service facility, giving
full details of the difficulty. A list of all main dealers
can be found on the Drawmer webpages. On receipt
of this information, service or shipping instructions
will be forwarded to you.
No equipment should be returned under the warranty
without prior consent from Drawmer or their authorised
representative.
For service claims under the warranty agreement a
service Returns Authorisation (RA) number will be
issued.
Write this RA number in large letters in a prominent
position on the shipping box. Enclose your name,
address, telephone number, copy of the original sales
invoice and a detailed description of the problem.
Authorised returns should be prepaid and must be
insured.
All Drawmer products are packaged in specially
designed containers for protection. If the unit is to
be returned, the original container must be used. If
this container is not available, then the equipment
should be packaged in substantial shock-proof
material, capable of withstanding the handling for
the transit.
Note: These specifications are provisional and may alter slightly upon product release.
THD @ 1W
THD@25W/8Ohms
POWER @ 1% THD
BRIDGED POWER @ 1% THD
GAIN
Balanced CROSSTALK @ 0dBu 1kHz
Input voltage for max unclipped output
Frequency Response (+/-0.25dBu )
Output Impedance
POWER REQUIREMENTS
Nominal rating:
~ 115 / 230 VAC
Absolute min/max:~ 90-132 / 180-264 VAC
45-63Hz
POWER CONSUMPTION
@ Idle
6W typ. 8W max at 230VAC
@ Standby
<500mW typical
1 0
MPA-90 GENERAL INFORMATION
SPECIFICATION
CONTACTING DRAWMER
We will be pleased to answer all application questions
to enhance your usage of Drawmer equipment.
Please address correspondence to:
DRAWMER Electronics LTD
Coleman Street
Parkgate
Rotherham
South Yorkshire
S62 6EL
United Kingdom
Telephone:
+44 (0) 1709 527574
Fax:
+44 (0) 1709 526871
Contact via E-mail: [email protected]
Further information on all Drawmer products,
dealers, Authorised service departments and other
contact information can be found on our website:
www.drawmer.com
CPA-50 8ohm
0.004
0.025
25+25 Wrms
100W rms
25.7dB
<85dB
775mv (0dBu)
20Hz-20kHz
6milli ohms
FUSE
20mm x 5mm, Class 3 Slo-Blo,
250Volt working. Conforming to IEC 127-2
@ 115V
@ 230V
Note: the fuse in the inlet has been set to a rating
that ensures it will blow before the internal fuse if the
amplifier is driven at clipping levels for any significant
length of time. This is to prevent the amplifier and/or
speakers from being damaged.
CASE SIZE
184mm(D) x 165mm(W ) x 51mm(H)
WEIGHT
CHAPTER 3
CPA-50 4ohm
0.004
N/A
50+50 Wrms
N/A
25.7dB
<85dB
775mv (0dBu)
20Hz-20kHz
6milli ohms
T800mA
T500mA
1.25kg
Ref:1v00A 29-06-16