Drawmer DS301 Посібник оператора - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник оператора для Підсилювач Drawmer DS301. Drawmer DS301 20 сторінок. Dual midi expander gate

The unit will have been supplied with a power cable suitable for domestic power

outlets in your country. For your own safety it is important that you use this cable.

The unit should always be connected to the mains supply earth using this cable

The mains fuse should be a class 3 slo-blo type rated at 80mA for 220/240 Volt

mains input voltage or 160mA for 110 Volt.

If for some reason the unit is to be used at a mains input operating voltage which

is different to that as supplied, the following procedure must be carried out. (see

following diagram)

1: Disconnect the unit from the mains.

2: Using a number 1 size pozidrive screwdriver, remove the two

self-tapping screws holding the voltage selection switch cover plate on the

rear panel.

3: Remove the cover plate and slide the switch fully to its opposite end.

4: Rotate the cover plate one half turn, (180E) and refit the two screws.

5: Replace with a correctly rated fuse for the selected operation voltage.

6: Re-connect to mains power source.

POWER CONNECTION

-3-