BD FACSCanto II Короткий довідник - Сторінка 4

Переглянути онлайн або завантажити pdf Короткий довідник для Вимірювальні прилади BD FACSCanto II. BD FACSCanto II 7 сторінок. Flow cytometer

7
Click
recording is finished.
8
Record data for each single-stained control.
9
Adjust the gates around the positive populations on the histogram for
each stained control tube.
10
Calculate compensation, and name the resulting setup.

Running Samples: BD FACSCanto Clinical Software

1
Prepare a worklist.
2
Install the first sample tube (manual acquisition) or the Loader rack
(automated acquisition), and click
3
When asked if you want to save the worklist, click No.
4
(Loader option only) Click
5
(Optional) To optimize settings during initial acquisition, click
and then
Adjust settings, and click
6
For manual acquisition, remove the sample tube when prompted and
install the next tube; repeat until data for all tubes has been recorded.
7
Inspect the lab report for each sample on the worklist.
Double-click the Status field to see a sample's report.

Running Samples: BD FACSDiva Software

1
Create a new specimen and tubes; rename them appropriately.
2
Create a global worksheet and rename it.
3
Use Experiment Layout to define tube labels and enter events to record.
4
On the global worksheet, create appropriate plots.
5
Install the first tube onto the cytometer; acquire data for the
corresponding tube in the Browser.
6
While data is being acquired, draw a gate around the population of
interest; set the other plots to show data from this population.
7
Click
8
Install the next tube.
9
Repeat until data has been recorded for all tubes.
; remove the unstained control tube when
.
to resume.
; remove the tube when recording is finished.
.
to run tubes manually.
4
,