Bosch 800 Series Інструкція з використання та догляду - Сторінка 28

Переглянути онлайн або завантажити pdf Інструкція з використання та догляду для Духовка. Bosch 800 Series. Bosch 800 Series 40 сторінок. Built-in wall ovens
Також для Bosch 800 Series: Інструкція з монтажу Посібник з монтажу (24 сторінок), Посібник з монтажу (40 сторінок), Інструкція з використання та догляду (12 сторінок), Посібник з монтажу (23 сторінок), Посібник з монтажу (28 сторінок), Посібник з монтажу (32 сторінок), Інструкція з експлуатації (32 сторінок), Посібник з монтажу (32 сторінок), Посібник із швидкого запуску та техніки безпеки (7 сторінок), Інструкція з використання та догляду (40 сторінок), Посібник з монтажу (40 сторінок), Посібник з монтажу (32 сторінок), Інструкція з монтажу Посібник з монтажу (40 сторінок), Посібник з монтажу (48 сторінок), Інструкція з використання та догляду (33 сторінок), Інструкція з використання та догляду (49 сторінок), Посібник із швидкого старту (7 сторінок), Посібник із швидкого запуску та техніки безпеки (13 сторінок), Посібник з монтажу (32 сторінок), Посібник з експлуатації (36 сторінок), Інструкція з монтажу Посібник з монтажу (29 сторінок), Інструкція з використання та догляду (24 сторінок), Інструкція з монтажу Посібник з монтажу (28 сторінок)

Bosch 800 Series Інструкція з використання та догляду
en-us Troubleshooting
Issue
E:92-10 lights up alternately.
E:92-40 lights up alternately.
A different error code appears in
the display window.
E:01-00 to E:90-10
Dishware is not dry.
28
Cause and troubleshooting
Spray arm rotation of the lower spray arm is blocked.
Arrange the dishware so that it does not obstruct spray arm rotation of the lower
spray arm.
Lower spray arm is not correctly fitted.
Fit the lower spray arm correctly.
Filters are soiled or blocked.
Clean the filters.
→  "Cleaning filters", Page 24
There is a technical issue.
Press
.
1.
Pull out the power cord plug of the appliance or switch off the breaker.
2.
Wait at least 2 minutes.
3.
Insert the power cord plug of the appliance in a power outlet or switch on the
4.
breaker.
Switch the appliance on.
5.
If the problem occurs again:
6.
Press
⁠ .
Turn off the water faucet.
Pull out the power cord plug.
Contact customer service →  Page 35 and give the error code.
No rinse aid used or dosage set too low.
Add Rinse aid →  Page 15 .
1.
Set the amount of rinse aid to be dispensed.
2.
→  "Setting the amount of rinse aid", Page 15
Cycle or cycle option has no drying phase, or drying phase is too short.
Select a wash cycle with drying. →  Page 10
Some option buttons decrease the drying result.
Water collects in recesses of dishware or silverware.