Bosch CBG934A 1 Series Посібник користувача та інструкція з монтажу - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник користувача та інструкція з монтажу для Духовка. Bosch CBG934A 1 Series. Bosch CBG934A 1 Series 40 сторінок.
6 Accessories
Use original accessories. These have been made espe-
cially for your appliance.
Note: Accessories may become deformed if they get
hot. Deformation has no effect on function. As the ac-
cessory cools down, it will regain its original shape.
Accessories
Wire rack
Universal pan
6.1 Locking function
The locking function prevents the accessories from tilt-
ing when they are pulled out.
You can pull out the accessories approximately halfway
without them tipping. The accessories must be inserted
into the cooking compartment correctly for the tilt pro-
tection to work properly.
6.2 Sliding accessories into the cooking
compartment
Always slide the accessory into the cooking compart-
ment the right way round. This is the only way to en-
sure that accessories can be pulled out approximately
halfway without tipping.
Turn the accessories so that the notch
1.
rear and is facing downwards.
Insert the accessory between the two guide rods for
2.
a shelf position.
The accessories supplied may differ depending on the
appliance model.
Wire rack
Baking tray
E.g. univer-
sal pan or
baking tray
is at the
To place the accessory at shelf positions with pull-
3.
out rails, pull out the pull-out rails.
Wire rack
or baking
tray
Note: The pull-out rails lock in place when they are
fully pulled out. Gently push the pull-out rails back
into the cooking compartment.
Use
¡ Cake tins
¡ Ovenproof dishes
¡ Cookware
¡ Meat, e.g. roasting joints or steak
¡ Frozen meals
¡ Moist cakes
¡ Baked items
¡ Bread
¡ Large roasts
¡ Frozen meals
¡ Catch dripping liquids, e.g. fat when
grilling food on the wire rack.
Insert the wire rack with the open
side facing the appliance door and
the curved lip facing downwards.
Slide the tray in with the sloping
edge towards the appliance door.
Place the accessory so that it is in-
serted on the rear stop of the pull-out
system.
Accessories en
9