Bosch Divar 700 Series Швидке встановлення - Сторінка 3

Переглянути онлайн або завантажити pdf Швидке встановлення для Духовка. Bosch Divar 700 Series. Bosch Divar 700 Series 4 сторінки. Digital hybrid recorder digital network recorder
Також для Bosch Divar 700 Series: Інформація (11 сторінок), Технічні характеристики (8 сторінок), Посібник з експлуатації (22 сторінок), Швидке встановлення (4 сторінок), Основні інструкції (14 сторінок)

Друкувати сторінку

Divar 700 Series

Quick install

To get the unit quickly operational, make the connections

described below and then enter the relevant data in the Quick

install menu.

Connections

For hybrid versions, connect the cameras to the BNC

Video in connectors (automatically terminated).

Connect monitor A to the CVBS, Y/C, or VGA (supporting

1280x1024) output MON A.

Connect the USB mouse to a USB port.

Connect monitor B to the CVBS, Y/C, or VGA (supporting

1024x768) output MON B*.

Connect up to 16 audio signals to the RCA Audio in

connectors*.

Connect the RCA Audio out connector(s) to a monitor or

an audio amplifier.

Connect up to 16 inputs to the Alarm I/O via the 25-pin

connector board.

Connect up to 4 alarm outputs to the Alarm I/O via the

25-pin connector board.

Connect the malfunction output (MAL OUT) via the

screw terminal adapter.

10.

Connect an Intuikey keyboard to the KBD in socket and

connect the terminator (supplied with the keyboard) to

the KBD out socket.

11.

Connect a Bosch pan/tilt/zoom control unit to the

Biphase port (via the 15-pole D-type connector board).

12.

Connect a third-party pan/tilt/zoom control unit to the

RS485 port (via the screw terminal adapter).

13.

Connect to your network via the Ethernet port. (Some

versions have a Secondary Ethernet port which can be

used as a separate network connection.)

14.

Connect your IP cameras to the network.

Switch on all connected equipment.

15.

Connect the power cord to the unit.

First-time use

The Quick install menu opens the first time the unit is used. Fill

in the basic settings in the tabs to get the unit operational. The

unit begins recording automatically when the Quick install

menu is closed.

Navigating

Use the USB mouse or the following front panel keys:

Bosch Security Systems

–

Use the enter

button to select a submenu or

item.

–

Use the arrow

move through a menu or list.

–

Use the escape

button to go back or to

switch off the menu.

Quick install menu

The Quick install menu contains four tabs: International,

Network, Schedule, and Recording. Navigate through these

tabs using Back and Next. Click Undo to cancel changes made

in the active tab. Click Close to exit the Quick install menu.

Changing Quick install settings overwrites customized settings.

International

Language — Select the language for the menu from the list.

Time zone — Select a time zone from the list.

Time format — Select either a 12 or a 24 hour clock format.

Time format — Fill in the current time.

Date format — Select a date format with month (MM), day

(DD), or year (YYYY) first.

Date — Fill in the current date.

Schedule

The currently active weekly schedule is shown. Each color

represents an available profile:

Click Overwrite to start making changes.

–

Select on which day the week should start and end.

–

Select when the day begins and ends on weekdays.

–

Select when the day begins and ends on weekends.

The display is automatically updated when settings are

changed.

Recording

Set the Normal recording Resolution, Quality, and Frame rate

for each profile in the table. Set the Alarm and Motion

recording Resolution, Quality, and Frame rate. These settings

are set for all profiles. If advanced settings were previously

made, click Overwrite to replace them with Quick install

settings.

Network

Fill in the settings that control the behavior of the unit with

respect to a network.

buttons to

DVR name — Enter a unique DVR name to be used in the

network.

DHCP — Enable DHCP to have IP address, Subnet mask, and

Default gateway assigned automatically by the DHCP server of

the network. The actual values are displayed.

IP address — Fill in the IP address when DHCP is not

enabled.

Subnet mask — Fill in the Subnet mask when DHCP is not

enabled.

Default gateway — Fill in the Default gateway when DHCP is

not enabled.

Auto DNS address — Enable to have the DNS server IP

address assigned automatically. The assigned address is

displayed.

DNS server — Fill in the DNS server address when Auto DNS

address is not enabled.

MAC address — The MAC address is read only.

Connection — Shows current network speed of the primary

Ethernet connection.

Remote streaming limit — Enter a value between 0 and

1000 Mbps to restrict the network bandwidth available for

streaming audio and video to all BVC workstations combined.

Quick install | en

F.01U.247.164 v3.4 | 2011.10