Electrolux ZKH7427OS Інструкція з експлуатації - Сторінка 11

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Духовка. Electrolux ZKH7427OS. Electrolux ZKH7427OS 19 сторінок. Built-in ovens

Друкувати сторінку

Cleaning and Maintenance

Before any cleaning switch the

oven off and let it cool down.

Never use steam or steam

machines to clean the appliance.

Important! Before carrying out

maintenance

operations, make sure that your

oven is disconnected from the

mains power supply.

Cleaning must be carried out after the oven

has cooled down. Wash the enamelled parts

with lukewarm water and detergent. Do not

use abrasive products, such as steel wool

pads, acids etc. since these could damage

the various surfaces. Rinse stainless steel

parts with water after use, and dry them with

a soft cloth or chamois leather.

In the case of persistent stains, you can

use normal non-abrasive detergents or

products specific for stainless steel readily

available on the market. Another alternative

is a drop of hot vinegar. When cleaning the

oven door with the glass top cover use just

hot water, taking care to avoid using coarse

cloths or abrasive products.

The hot acids of fruit (e.g. Iemons, stewed

prunes, etc.) leave difficult-to-remove stains

on the enamelled surfaces; this inconvenient

may remove enamel gloss, but, it does not

impair oven operation.

Clean the oven thoroughly after use; in this

way it will be possible to remove cooking

residuals more easily, thus avoiding these

from burning the next time the oven is used.

Models in stainless steel or aluminium:

We recommend to clean the oven door using

only a wet sponge and dry it up after cleaning

with a soft cloth.

Never use steel wool, acids or abrasive

products as they can damage the oven

surface. Clean the oven control panel

following the same precautions.

and

cleaning

Oven door cleaning

For a better cleansing of the oven door, you

are suggested to remove it from the appliance

with the following procedure:

open tho door completely; lift the small

levers placed on the two hinges and turn

the levers towarde the inside (Fig. 10).

Slowly close the oven door, until it

touches the two levers,

then push it towards the oven and

remove it by pulling it towards the

outeide.

Place the door on a horizontal level.

After cleaning, assemble the door again by

carrying out the procedure described above

backwards. When the two small levers are

placed again on the hinges, the door will

have been accurately fit.

Fig. 10

FO 0452