Electrolux 400 SERIES Посібник з використання та догляду - Сторінка 42
Переглянути онлайн або завантажити pdf Посібник з використання та догляду для Пральна машина Electrolux 400 SERIES. Electrolux 400 SERIES 46 сторінок. Front load dryer
Також для Electrolux 400 SERIES: Посібник з використання та догляду (16 сторінок), Посібник з використання та догляду (39 сторінок), Інструкція з монтажу Посібник з монтажу (50 сторінок), Посібник з використання та догляду (28 сторінок)
Друкувати сторінку
42 Troubleshooting
Before calling
Before calling for service, review this list. It may save both time and expense. The list
includes common occurrences that are not the result of defective workmanship or
materials in this dryer.
PROBLEM POSSIBLE CAUSES
Dryer does
not start.
LED
displays
"
".
Dryer runs
but won't
heat.
• Electrical power cord is not
securely plugged in or plug
may be loose.
• House fuse blown or circuit
breaker tripped.
• Action of pressing start but-
ton on "touch screen" style
console not recognized
• Thermal limiter tripped.
• Delay time inadvertently
activated.
• Door may be open. Unit will
not operate with door open.
• Dryer has been programmed
to temporarily perform a
repeating demo cycle.
• There are 2 house fuses in
the dryer circuit. If 1 of the 2
fuses is blown, the drum may
turn but the heater will not
operate (electric models).
• Gas supply valve is not open
(gas models).
• Dryer does not have enough
air supply to support the
burner flame (gas models).
• LP gas supply tank is empty
or there has been a utility
interruption of natural gas
(gas models).
SOLUTIONS
• Make sure the plug fits tightly in
wall outlet.
• Reset circuit breaker or replace
fuse.
• Make sure electrical line is not
overloaded and the dryer is on a
separate circuit.
• Press start button with bare fin-
gertip.
• Call authorized service person for
replacement.
• Ensure delay time not activated.
• Ensure door is closed.
• Reset the unit back to factory de-
fault settings as described earlier.
• Replace fuse.
• Check to make sure supply valve
is open. Refer to the installation
instructions provided with the dryer.
• See the Installation sections of this
guide.
• Refill or replace tank. Dryer should
heat when utility service is restored.