Bdcom S1010-8P-120 Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Перемикач Bdcom S1010-8P-120. Bdcom S1010-8P-120 9 сторінок. 100m poe switch

Power socket

Connect the female connector of the power cord here, and the male connector

to the AC (Alterna

the power supply meets the requirement of the input voltage

Grounding

The switch already comes with lightning protec on mechanism. You can

also ground the switch through the PE (Protec

or with Ground Cable.

Cau on

Installation

PoE Switch. ........................................ 1

▄

Power Cord....... ................................. 1

▄

User Guide. ....................................... 1

▄

Accessories(Rack angle iron*2, Rack installa on bolt*8, plas

▄

Caution： If any part is lost and damaged, please contact your local agent immediately.

To avoid any device damage and bodily injury caused by improper use, please observe the following

rules.

Keep the power oﬀ during the installa on.

▄

Wear an ESD-preven ve wrist strap, and make sure that the wrist strap has a good skin contact

▄

and is well grounded.

Use only the power cord provided with the switch.

▄

Make sure that the supply voltage matches the speciﬁca ons indicated on the rear panel of the

▄

switch.

Ensure the vent hole is well ven ated and unblocked.

▄

Do not open or remove the cover of the switch.

▄

Before cleaning the device, cut oﬀ the power supply. Do not clean it by the waterish cloth, and

▄

never use any other liquid cleaning method.

g Current) power outlet. Please make sure the voltage of

Please use the provided power cord.

：

Make sure the power socket has a good contact with the ground.

g Earth) cable of AC cord

cushion*4)