Bdcom S1216 Інструкція з експлуатації обладнання - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з експлуатації обладнання для Перемикач Bdcom S1216. Bdcom S1216 19 сторінок.
Друкувати сторінкуChapter 1 Information of S2116 Switch
This section explains the parameters of S2116 switch.
1.1 Standard configuration
S2116switch standard ports consists of 2 parts: 16 fast Ethernet interfaces and 1
Console interface. Refer to the following table:
Features of standard ports:
Port name
Fast
interfaces
Console
In addition, there are 2 extended Ethernet slots in front of the S2116switch, a
grounding bar in the rear and a power supply plug and a power switch (ON and OFF)
plug.
The front-panel of S2116 Switch is shown below:
Components of S2116 Switch front-panel:
NO.
1
PWR
2
SYS
3
CONSOLE
4
Speed: 10/100M
Ethernet
interface with LINK/ACT, 100 Mbps indicator.
Speed: 9600bps, RJ45 interface
interface
Figure 1-1 The front-panel of S2116 Switch
Name
Power indicator lights
System Indicator
Console interface
Indicator
on each port.
BDCOM S2116 Switch Hardware Installation Guide
Features
, cable: MDI/MDIX, UTP (RJ45)
auto-sense
Switch on and indicator lights.
Indicator lights when the system is turning
on.
Indicator blinks when the systems is
functioning.
Implement Switch Local management.
Indicator lights when the linking is normal.
embedded
Indicator blinks when data is being sent or
received.
Description
- 1 -