Bosch HBC38D754 Інструкція з експлуатації - Сторінка 19
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Духовка. Bosch HBC38D754. Bosch HBC38D754 36 сторінок. Combination steam oven
Basic settings
Your appliance has various Basic settings, which are preset at
the factory. You can change the basic settings as you require.
If you want to cancel all the changes, you can restore the
factory settings.
The appliance must be switched off.
If required, press the
%
1.
Basic setting
Select language
Audible signal duration
Button tone
Display brightness
Contrast
Continue after door closed
Adjust individually
Display button description
Water hardness
Steam cooking heat signal
Restore factory settings
Automatic switch-off
If you do not change the settings on your appliance for several
hours, the automatic switch-off function will be activated.
"Automatic switch-off" appears in the display.
Care and cleaning
In this section, you will find information on
care and cleaning of your appliance
■
the cleaning aid
■
descaling
■
:
Risk of short circuit!
Do not use high-pressure cleaners or steam jet cleaners to
clean your appliance.
Caution!
Risk of surface damage: Do not use
harsh or abrasive cleaning agents
■
oven cleaners
■
corrosive or aggressive cleaners, or those containing
■
chlorine
cleaning agents with a high alcohol content
■
If such an agent comes into contact with the front of the
appliance, wash it off immediately with water.
button to switch off the appliance.
Function
Changes the display language
Sets the length of the audible signal at the end of an opera-
tion
Switches on/off the audible signal that sounds when you
press a button
Changes display brightness
Changes display contrast
Not necessary to restart after the appliance door has been
opened
Sets programme cooking results to be generally higher or
lower
Switches the button description display on or off when the
appliance is switched on
Sets the water hardness range for the descaling indicator
Audible signal at the end of the heating up phase during
steaming
Restores the appliance to the factory settings:
all changes to the basic settings are deleted
■
Memory is cleared
■
Automatic calibration is carried out again
■
Press the
°
button.
2.
"Basic settings" and "Select language" appear in the display.
Press the
X
button until the desired basic setting appears.
3.
Turn the rotary selector to change the setting.
4.
Press the
button to exit basic settings.
°
5.
The change is saved.
You can change the following basic settings:
Press any button to deactivate the automatic switch-off. You
can now make new settings.
Caution!
Risk of surface damage: If descaler or the oven and grill
cleaning gel comes into contact with the front of the appliance
or other sensitive surfaces, wash it off immediately with water.
Remove food residues from the cooking compartment as soon
as the appliance has cooled. Burnt-on remains will be much
harder to remove later.
For heavy soiling use the cleaning aid (see section: Cleaning
aid).
Salts are very corrosive and can cause rust. Remove remains
of acidic sauces (ketchup, mustard) or salted food from the
cooking compartment immediately after cooling.
Do not use hard scouring pads or cleaning sponges.
Possible settings
30 different languages
short / medium / long
off / on
day / medium / night
7 levels -
ÛÛÛÚÛÛÛ
+
automatic/press
to continue
n
operation
7 levels -
+
ÛÛÛÚÛÛÛ
on / off
softened / 1soft / 2medium /
3hard / 4very hard
Yes/no
Yes/no
19