Bosch HBC86K7 3 Series Інструкція з експлуатації - Сторінка 12
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Духовка. Bosch HBC86K7 3 Series. Bosch HBC86K7 3 Series 40 сторінок.
Друкувати сторінку
Series of operations
You can use the SeriesOperations function to set up to three
operating modes and then start.
Requirement: you must set a cooking time for each step.
Ovenware
Always use microwave-safe, heat-resistant ovenware.
Setting a series of operations
Set a cooking time for each step in the series of operations.
Press the
button.
2
1.
The button lights up. "SeriesOperations" appears in the
display as the heading. The 1 for the first step in the series of
operations is in brackets.
6HULHV RI RSHUDWLRQV
Select and set the desired operating mode.
2.
Press the
button to return to [1] and use the rotary
Y
3.
selector to select [2] for the second step in the series of
operations.
Time-setting options
You can call up the time-setting options menu by pressing
the
0
button. The following functions are available:
If the oven is switched off:
Setting the timer
■
Setting the clock
■
If the oven is switched on:
Setting the timer
■
Setting the cooking time
■
Setting a later end time
■
Setting the timer
The timer runs independently of the oven. You can use it as a
kitchen timer and set it at any time.
Press the
button.
0
1.
The time-setting options menu appears.
Press the
button and set the timer run time using the
X
2.
rotary selector.
Press the
0
button to close the time-setting options menu.
3.
The display returns to its previous state. The
timer appears, and the time can be seen counting down.
When the time has elapsed
A signal sounds. The time has elapsed. The display shows
00:00. You can cancel the signal earlier by pressing the
U
button.
12
Select and set the desired operating mode.
4.
Press the
5.
selector to select [3] for the third step in the series of
operations.
Select and set the desired operating mode.
6.
Press the
7.
Appliance operation begins.
Note. The first step in the series of operations appears in the
display. The cooking time starts counting down.
The cooking time has elapsed
A signal sounds. The series of operations is finished. You can
stop the audible signal by pressing the
Changing the setting
Changes can only be made before operation begins.
Press the
1.
in the brackets.
Use the rotary selector to select the step that you wish to
2.
change.
Change the setting.
3.
Cancelling operation
Press and hold the
You can now change the settings.
Cancelling the timer time
Press the
Press the
back to 00:00. Press the
Changing the timer time
Press the
Press the
timer time by turning the rotary selector. Press the
close the menu.
Setting the cooking time
If you set the cooking time for your meal, operation stops
automatically once this time has elapsed. The oven stops
heating.
Prerequisite: The type of heating and temperature must be set.
Example in diagram: Top/bottom heating, 180 °C, 45 minutes
Press the
1.
The time-setting options menu appears.
symbol for the
U
0
Y
button to return to [2] and use the rotary
button.
n
Y
button to move upwards until 1, 2 or 3 appears
button until "Select function" appears.
n
button to open the time-setting options menu.
0
X
button and use the rotary selector to turn the time
button to close the menu.
0
0
button to open the time-setting options menu.
X
button and in the next few seconds change the
0
button.
7LPHVHWWLQJ RSWLRQV
7LPHU
PLQVHF
&ORVH ZLWK
button.
0
button to
0