Draytek Vigor2760 Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Бездротовий маршрутизатор Draytek Vigor2760. Draytek Vigor2760 20 сторінок. Vdsl2 router
Також для Draytek Vigor2760: Посібник із швидкого старту (2 сторінок)
Друкувати сторінку
European Community Declarations
Manufacturer:
DrayTek Corp.
Address:
No. 26, Fu Shing Road, Hukou Township, Hsinchu Industrial Park, Hsinchu County, Taiwan 303
Product:
Vigor2760 Series Router
DrayTek Corp. declares that Vigor2760 Series of routers are in compliance with the following essential
requirements and other relevant provisions of R&TTE 1999/5/EC, ErP 2009/125/EC and RoHS 2011/65/EU
The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive 2004/108/EC by
complying with the requirements set forth in EN55022/Class B and EN55024/Class B.
The product conforms to the requirements of Low Voltage (LVD) Directive 2006/95/EC by complying with the
requirements set forth in EN60950-1.
This product is designed for the DSL and 2.4GHz/5GHz WLAN network throughout the EC region. Please see
the user manual for the applicable networks on your product.
Regulatory Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device may accept any interference received, including interference that may cause undesired operation.
R
F
E
x
p
o
s
u
r
e
R
F
E
x
p
o
s
u
r
e
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used
for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must
not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must
be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure
compliance.
C
a
u
t
i
o
n
C
a
u
t
i
o
n
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority
to operate the equipment.
The antenna/transmitter should be kept at least 20 cm away from human body.
Please visit http://www.draytek.com/user/SupportDLRTTECE.php
W
a
r
n
i
n
g
W
a
r
n
i
n
g
v
.
Vigor2760 Series User's Guide