Alemlube O30060 Інструкція з експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Водяний насос Alemlube O30060. Alemlube O30060 17 сторінок. Oil pump

Daily Use

Button usage, calibration & measurement unit change

Reset the present total (See Fig. 1)

1) When the meter is on standby, press the RESET key.

2) The display shows all the segments.

3) The meter resets the present total already.

Show current correction factor and general total (See Fig. 2)

Press MOVE and RESET together and hold for less than 3 seconds.

Value "1.4000" is the correction factor which can be reset; "1234567"

is the general total which cannot be reset.

Measurement unit change (See Fig. 3)

Press MOVE and RESET together and hold for more than 3 seconds.

Zone 7 on the display is the current unit. Press RESET to chose

a different measurement unit and then press MOVE and hold

for more than 3 seconds to confirm.

NSW/ACT

QLD/PNG

TEL: (02) 9939 0711

TEL: (07) 3889 8480

FAX: (02) 9939 0411

FAX: (07) 3889 8490

OWNER'S TECHNICAL MANUAL

Oil Transfer Kit with Meter & Trolley

FIG. 2

FIG. 3

VIC/TAS

TEL: (03) 8787 8288

FAX: (03) 8787 8266

Visit our website at

www.alemlube.com.au

FIG. 1

SA/NT

TEL: (08) 9209 3066

TEL: (08) 8241 7111

FAX: (08) 9209 3933

FAX: (08) 8241 7011

www.alemlube.co.nz

O30060

TEL: (09) 447 1007

FAX: (09) 447 1008