Carlisle Binks 107760 Посібник з експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Контролер Carlisle Binks 107760. Carlisle Binks 107760 17 сторінок. Back pressure regulator

In this part sheet, the words WARNING, CAUTION and NOTE are used to emphasize important safety
information as follows:
WARNING
Hazards or unsafe practices which could result in
severe personal injury, death or substantial
property damage.
READ THE MANUAL. Before operating finishing equipment, read
and understand all safety, operation and maintenance information
provided in the operation manual.
WEAR SAFETY GLASSES. Failure to wear safety glasses with side
shields could result in serious eye injury or blindness.
DE-ENERGIZE, DE-PRESSURISE, DISCONNECT AND LOCK OUT
ALL POWER SOURCES DURING MAINTENANCE. Failure to de-
energize, disconnect and lock out all power supplies before
performing equipment maintenance could cause serious injury or
death.
NOISE LEVELS. The A-weighted sound level of pumping and spray
equipment may exceed 85 dB(A) depending on equipment
settings. Actual noise levels are available on request. It is
recommended that ear protection is worn at all times while
equipment is in use.
INSPECT THE EQUIPMENT DAILY. Inspect the equipment for
worn or broken parts on a daily basis. Do not operate the
equipment if you are uncertain about its condition.
EQUIPMENT MISUSE HAZARD. Equipment misuse can cause the
equipment to rupture, malfunction or start unexpectedly and
result in serious injury.
HIGH PRESSURE CONSIDERATION. High pressure can cause
serious injury. Relieve all pressure before servicing. Spray from
the gun, hose leaks or ruptured components can inject fluid into
your body and cause extremely serious injury.
STATIC CHARGE. Fluid may develop a static charge that must be
dissipated through proper grounding of the equipment, objects to
be sprayed and alll other electrically conductive objects in the
dispensing area. Improper grounding or sparks can cause a
hazardous condition and result in fire, explosion or electric shock
and other serious injury.
PROP 65 WARNING. WARNING: This product contains chemicals
known to the state of California to cause cancer and birth defects
or other reproductive harm.
IT IS THE RESPONSIBILITY OF THE EMPLOYER TO PROVIDE THIS INFORMATION TO THE
77-3247 R2.2
Hazards or unsafe practices which could result
in minor personal injury, product or property
WARNING
Read the following warnings before using this equipment.
OPERATOR OF THE EQUIPMENT.
CAUTION
damage
3/16
NOTE
Important installation, operation or
maintenance information.
AUTOMATIC EQUIPMENT. Automatic
equipment may start suddenly
without warning.
PROJECTILE HAZARD. You may be
injured by venting liquids or gases
that are released under pressure, or
flying debris.
KNOW WHERE AND HOW TO SHUT
OFF THE EQUIPMENT IN CASE OF
AN EMERGENCY.
PRESSURE RELIEF PROCEDURE.
Always follow the pressure relief
procedure in the equipment
instruction manual.
OPERATOR TRAINING. All personnel
must be trained before operating
finishing equipment.
PACEMAKER WARNING. You are in
the presence of magnetic fields
which may interfere with the
operation of certain pacemakers.
KEEP EQUIPMENT GUARDS IN
PLACE. Do not operate the
equipment if the safety devices have
been removed.
NEVER MODIFY THE EQUIPMENT.
Do not modify the equipment unless
the manufacturer provides written
approval.
PINCH POINT HAZARD. Moving parts
can crush and cut. Pinch points are
any areas where ther are moving
parts.
www.carlisleft.com
EN