1RT DTK4500 Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для ВІДЕОМАГНІТОФОН 1RT DTK4500. 1RT DTK4500 8 сторінок.

Друкувати сторінку

Index Search

An index mark will be assigned at the beginning of each record-

ings you make. You may skip to a specific marked point by fol-

lowing the steps below.

Press [SEARCH-MODE] so that the Index Search menu

appears.

Enter the number of recordings you

wish to skip by pressing [PLAY] or

[STOP] within 30 seconds.

Press [F.FWD] or [REW] to start index search. If you

want to go in the forward direction, press [F.FWD]. If you

want to go in the reverse direction, press [REW].

• After index search, the VCR will play the tape automati-

cally.

Time Search

This feature allows you to go to a specific point on a tape by

entering the exact amount of time you wish to skip in order to

reach the point.

Press [SEARCH-MODE] so that the Time Search menu

appears.

Enter your desired time to skip by

pressing [PLAY] or [STOP] within 30 seconds.

Press [F.FWD] or [REW] to start time search. If you want

to go in the forward direction, press [F.FWD]. If you want

to go in the reverse direction, press [REW].

• After time search, the VCR will play the tape automati-

cally.

RECORDING FUNCTION

It may be unlawful to record play back copyrighted material with-

out the consent of the copyright owner.

Accidental erasure prevention

To prevent accidental recording on a recorded

cassette, remove its record safety tab. To

record on it later, cover the hole with cello-

phane tape.

Before recording, make sure:

• The desired channel is selected by pressing [Number] on

the remote control or the [CHANNEL

nected the VCR to a cable box or satellite box as in "VCR

to TV Connection" on page 3, select the VCR to channel

3 or 4 the same channel as the RF output channel of the

VCR. Then, select the channel you want to record at the

cable box or satellite box. In this case, you can ONLY

record and view the SAME channel. )

• There is a tape with its safety tab into the VCR.

• The desired recording speed is selected in SP(standard play) or

SLP(super long play) mode by pressing [SPEED] on the remote

control.

Tape Speed

Type of tape

SP mode

SLP mode

Viewing and Recording the Same Program

Begin the recording by pressing [RECORD].

• To temporarily stop recording or resume it, press

[PAUSE/STILL]. After the VCR has been in Pause mode for

5 minutes, it will stop automatically to protect the tape and

the video head from damage.

Press [STOP] when recording is completed.

INDEX SEARCH

TIME SEARCH

2 : 50

Record safety tab

(

)

]. (If you con-

Recording/Playback Time

T60

T120

1hour

2hours

3hour

6hour

OTR (One Touch Recording)

This feature allows you to set the recording length simply by

pressing [REC/OTR] on the VCR.

Begin OTR by pressing [REC/OTR] on the VCR repeat-

edly until the desired recording length appears.

REC

(Normal recording)

TIMER RECORDING

You may set the VCR to start recording while you are away. You

can set eight programs to record on specific days, daily or week-

ly within a 1 year period.

Insert a tape with its safety tab into the VCR.

Select main menu by pressing [MENU].

Select "TIMER PROGRAMMING" by pressing [PLAY] or

[STOP]. Then, press [F.FWD].

• If you have not yet set the clock, "CLOCK SET" appears. If

so, continue with the step [3] in "CLOCK SET UP" section.

Then, set the timer recording.

Set the timer.

Set the program number (1~8)

Program number which is not set up flashes.

Press [PLAY] or [STOP] repeatedly for the

desired program number.Then, press [F.FWD].

Select once, daily or weekly recording

For once: Press [PLAY] or [STOP] to point to "ONCE".

For daily (Monday~Friday): Press [PLAY] or

[STOP] to point to "DAILY".

For weekly: Press [PLAY] or [STOP] to point to

"WEEKLY".

Then, press [F.FWD].

Set the date

First, press [PLAY] or [STOP] for the month. Then, press [F.FWD].

Next, press [PLAY] or [STOP] for the day. Then, press [F.FWD].

Set the start time

First, press [PLAY] or [STOP] for the hour. Then, press [F.FWD].

Next, press [PLAY] or [STOP] for the minute. Then, press [F.FWD].

And then, press [PLAY] or [STOP] for AM or PM. Then, press [F.FWD].

Set the end time

Follow the instructions of "Set the start time" to set the end time.

Set the channel number

Press [PLAY] or [STOP] repeatedly for the desired channel number.

Then, press [F.FWD].

If you connected the VCR to a cable box or satellite box as in "Connect

VCR to TV" on page 3, select the VCR to channel 3 or 4 the same channel

as RF output channel of the VCR.

T160

Then, select the channel you want to record at the cable box or satellite box.

2-2/3hours

Leave the cable box or satellite box on for timer recording.

8hour

Set the tape speed

Press [PLAY] or [STOP] repeatedly for the

desired tape speed.

Then, press [F.FWD].

• To go back one step, press [REW].

To set another program, repeat step [4]. To exit, press

[C.RESET/EXIT].

Press [POWER] to set the timer. The TIMER indicator on

the VCR comes on. TIMER RECORDING WILL NOT BE

ACTIVATED UNLESS YOU TURN THE VCR OFF.

– 5 –

OTR(0:30)

OTR(8:00)

OTR(7:30)

OTR(1:00).....

PROGRAM NUMBER 4

DATE

- - / - -

START TIME - - : - -

- -

END

TIME - - : - -

- -

CHANNEL

- -

REC SPEED - -

PROGRAM NUMBER 4

ONCE

DAILY

WEEKLY

ONE TIME PROGRAM

PROGRAM NUMBER 4

DATE

05/12 MON

START TIME 07:30

END

TIME 08:30

CHANNEL

REC SPEED SP

SLP