Drayton Lifestyle LP711Si Інструкція користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція користувача для Таймер Drayton Lifestyle LP711Si. Drayton Lifestyle LP711Si 20 сторінок. Central heating control
Також для Drayton Lifestyle LP711Si: Інструкція з монтажу (2 сторінок), Інструкція з обслуговування (2 сторінок)
Друкувати сторінку
This won't alter the timings in your program, which you can
THE LP111Si 24hr ELECTRONIC TIMESWITCH
return to by selecting TIMED.
THE LP111Si 24hr ELECTRONIC TIMESWITCH
return to by selecting TIMED.
THE LP111Si 24hr ELECTRONIC TIMESWITCH
THE LP111Si 24hr ELECTRONIC TIMESWITCH
LP111Si – a 24hr program, up to 3 heating periods each day,
THE LP111Si 24hr ELECTRONIC TIMESWITCH
LP111Si – a 24hr program, up to 3 heating periods each day,
THE LP111Si 24hr ELECTRONIC TIMESWITCH
and every day the same.
LP111Si – a 24hr program, up to 3 heating periods each day,
and every day the same.
LP111Si – a 24hr program, up to 3 heating periods each day,
and every day the same.
Want to leave a timing as it is? Just press SET? and move on
LP111Si – a 24hr program, up to 3 heating periods each day,
and every day the same.
Want to leave a timing as it is? Just press SET? and move on
LP111Si – a 24hr program, up to 3 heating periods each day,
to the next one.
Want to leave a timing as it is? Just press SET? and move on
and every day the same.
to the next one.
Want to leave a timing as it is? Just press SET? and move on
and every day the same.
to the next one.
If you need to reset your timings to the standard program
Want to leave a timing as it is? Just press SET? and move on
to the next one.
If you need to reset your timings to the standard program
Want to leave a timing as it is? Just press SET? and move on
and start again, press 'SET' and '+' together to go back to
If you need to reset your timings to the standard program
to the next one.
and start again, press 'SET' and '+' together to go back to
If you need to reset your timings to the standard program
to the next one.
the pre-set program.
and start again, press 'SET' and '+' together to go back to
If you need to reset your timings to the standard program
the pre-set program.
and start again, press 'SET' and '+' together to go back to
If you need to reset your timings to the standard program
the pre-set program.
and start again, press 'SET' and '+' together to go back to
the pre-set program.
and start again, press 'SET' and '+' together to go back to
the pre-set program.
The standard program
the pre-set program.
The standard program
The standard program
Your system will come on for up to 3 heating periods every
The standard program
Your system will come on for up to 3 heating periods every
The standard program
24hrs. ON1 starts the first one, OFF1 finishes it, and so on.
Your system will come on for up to 3 heating periods every
The standard program
24hrs. ON1 starts the first one, OFF1 finishes it, and so on.
Your system will come on for up to 3 heating periods every
Notice that ON2 and OFF2 are set to the same time.* This
24hrs. ON1 starts the first one, OFF1 finishes it, and so on.
Your system will come on for up to 3 heating periods every
24hrs. ON1 starts the first one, OFF1 finishes it, and so on.
Notice that ON2 and OFF2 are set to the same time.* This
means your system won't respond, but if you want to activate
Your system will come on for up to 3 heating periods every
Notice that ON2 and OFF2 are set to the same time.* This
24hrs. ON1 starts the first one, OFF1 finishes it, and so on.
Notice that ON2 and OFF2 are set to the same time.* This
means your system won't respond, but if you want to activate
that middle period or change any other timings – read on.
24hrs. ON1 starts the first one, OFF1 finishes it, and so on.
means your system won't respond, but if you want to activate
Notice that ON2 and OFF2 are set to the same time.* This
means your system won't respond, but if you want to activate
that middle period or change any other timings – read on.
Notice that ON2 and OFF2 are set to the same time.* This
that middle period or change any other timings – read on.
means your system won't respond, but if you want to activate
that middle period or change any other timings – read on.
means your system won't respond, but if you want to activate
that middle period or change any other timings – read on.
SWITCHING
that middle period or change any other timings – read on.
SWITCHING
SWITCHING
– start of first timed period
ON 1
SWITCHING
– start of first timed period
ON 1
SWITCHING
– start of first timed period
ON 1
– end of first timed period
OFF 1
– start of first timed period
SWITCHING
ON 1
– end of first timed period
– start of first timed period
OFF 1
ON 1
– end of first timed period
OFF 1
– start of second timed period*
– start of first timed period
– end of first timed period
ON 2
ON 1
OFF 1
– start of second timed period*
– end of first timed period
ON 2
OFF 1
– start of second timed period*
ON 2
– end of second timed period*
– end of first timed period
OFF 2
– start of second timed period*
OFF 1
ON 2
– end of second timed period*
OFF 2
– start of second timed period*
ON 2
– end of second timed period*
OFF 2
– start of third timed period
– start of second timed period*
– end of second timed period*
ON 3
ON 2
OFF 2
– start of third timed period
– end of second timed period*
ON 3
OFF 2
– start of third timed period
ON 3
– final switch-off of the day
– end of second timed period*
OFF 3
– start of third timed period
OFF 2
ON 3
– final switch-off of the day
OFF 3
– start of third timed period
ON 3
– final switch-off of the day
OFF 3
– start of third timed period
– final switch-off of the day
ON 3
OFF 3
Changing the timings
– final switch-off of the day
OFF 3
Changing the timings
I
– final switch-off of the day
OFF 3
Changing the timings
I
Press the SET? button and you'll see 'SET PROG?'.
Changing the timings
I
Press the SET? button and you'll see 'SET PROG?'.
Changing the timings
I
Press the SET? button and you'll see 'SET PROG?'.
Changing the timings
Press the SET? button and you'll see 'SET PROG?'.
I
I
Press the SET? button and you'll see 'SET PROG?'.
Press the SET? button and you'll see 'SET PROG?'.
I
Press the YES button, and you'll see ON1, the start of your first
I
PROG?
I
Press the YES button, and you'll see ON1, the start of your first
I
heating period. Adjust it in 1-minute steps using the – and +
Press the YES button, and you'll see ON1, the start of your first
I
Press the YES button, and you'll see ON1, the start of your first
heating period. Adjust it in 1-minute steps using the – and +
buttons. If the – and + buttons are held down, the time changes
heating period. Adjust it in 1-minute steps using the – and +
I
Press the YES button, and you'll see ON1, the start of your first
heating period. Adjust it in 1-minute steps using the – and +
buttons. If the – and + buttons are held down, the time changes
in 10-minute steps.
Press the YES button, and you'll see ON1, the start of your first
buttons. If the – and + buttons are held down, the time changes
heating period. Adjust it in 1-minute steps using the – and +
in 10-minute steps.
buttons. If the – and + buttons are held down, the time changes
heating period. Adjust it in 1-minute steps using the – and +
in 10-minute steps.
buttons. If the – and + buttons are held down, the time changes
in 10-minute steps.
buttons. If the – and + buttons are held down, the time changes
in 10-minute steps.
in 10-minute steps.
I
I
Press SET?, and you'll see OFF1, the end of your first heating
I
Press SET?, and you'll see OFF1, the end of your first heating
period. Adjust this in the same way, press SET?, then repeat the
I
Press SET?, and you'll see OFF1, the end of your first heating
Press SET?, and you'll see OFF1, the end of your first heating
period. Adjust this in the same way, press SET?, then repeat the
I
procedure for ON2, OFF2, ON3 and OFF3.
period. Adjust this in the same way, press SET?, then repeat the
I
Press SET?, and you'll see OFF1, the end of your first heating
procedure for ON2, OFF2, ON3 and OFF3.
period. Adjust this in the same way, press SET?, then repeat the
Press SET?, and you'll see OFF1, the end of your first heating
procedure for ON2, OFF2, ON3 and OFF3.
period. Adjust this in the same way, press SET?, then repeat the
procedure for ON2, OFF2, ON3 and OFF3.
period. Adjust this in the same way, press SET?, then repeat the
procedure for ON2, OFF2, ON3 and OFF3.
procedure for ON2, OFF2, ON3 and OFF3.
I
When you press SET? after setting OFF3, the timeswitch will
I
I
When you press SET? after setting OFF3, the timeswitch will
return to normal operation.
I
When you press SET? after setting OFF3, the timeswitch will
I
When you press SET? after setting OFF3, the timeswitch will
return to normal operation.
return to normal operation.
I
When you press SET? after setting OFF3, the timeswitch will
return to normal operation.
THE LP711Si 7-DAY ELECTRONIC TIMESWITCH
When you press SET? after setting OFF3, the timeswitch will
return to normal operation.
THE LP711Si 7-DAY ELECTRONIC TIMESWITCH
THE LP711Si 7-DAY ELECTRONIC TIMESWITCH
return to normal operation.
STANDARD PROGRAM
STANDARD PROGRAM
STANDARD PROGRAM
6.30am
STANDARD PROGRAM
6.30am
STANDARD PROGRAM
6.30am
8.30am
6.30am
STANDARD PROGRAM
8.30am
6.30am
8.30am
12.00pm
6.30am
8.30am
12.00pm
8.30am
12.00pm
12.00pm
8.30am
12.00pm
12.00pm
12.00pm
12.00pm
4.30pm
12.00pm
12.00pm
4.30pm
12.00pm
4.30pm
10.30pm
12.00pm
4.30pm
10.30pm
4.30pm
10.30pm
4.30pm
10.30pm
10.30pm
10.30pm
I
Press YES and you'll see
I
If the – and + buttons a
od. Adjust it in 1-minute
I
Press YES and you'll see
od. Adjust it in 1-minute s
If the – and + buttons a
10-minute steps.
Press YES and you'll se
If the – and + buttons ar
od. Adjust it in 1-minute
If the – and + buttons ar
10-minute steps.
od. Adjust it in 1-minute
10-minute steps.
If the – and + buttons a
10-minute steps.
If the – and + buttons a
10-minute steps.
10-minute steps.
I
Press SET?, and you'll s
I
I
Press SET?, and you'll s
period. Adjust this in th
I
Press SET?, and you'll se
I
Press SET?, and you'll se
period. Adjust this in the
the procedure for ON2,
period. Adjust this in the
I
Press SET?, and you'll s
period. Adjust this in the
the procedure for ON2,
Press SET?, and you'll s
the procedure for ON2, O
period. Adjust this in the
the procedure for ON2, O
period. Adjust this in the
the procedure for ON2,
the procedure for ON2,
Set each day
Set each day
I
Set each day
If, after you've set OFF3
I
Set each day
I
If, after you've set OFF3
Set each day
weekdays, press SET?
I
If, after you've set OFF3
Set each day
I
If, after you've set OFF3 y
weekdays, press SET? u
adjust – then go throug
weekdays, press SET? u
I
If, after you've set OFF3
weekdays, press SET? u
adjust – then go through
wish. Press SET? to mo
If, after you've set OFF3
adjust – then go through
weekdays, press SET? u
adjust – then go through
wish. Press SET? to mov
finished, press SET? un
weekdays, press SET? u
wish. Press SET? to mov
adjust – then go through
wish. Press SET? to mov
finished, press SET? unt
adjust – then go through
finished, press SET? unti
wish. Press SET? to mo
finished, press SET? unti
wish. Press SET? to mo
finished, press SET? unt
finished, press SET? un
I
If you don't want to alte
I
I
If you don't want to alter
SET? until you see 'SET
I
If you don't want to alter
If you don't want to alter
SET? until you see 'SET
I
SET? until you see 'SET
I
If you don't want to alter
SET? until you see 'SET S
Set weekend
If you don't want to alter
SET? until you see 'SET
Set weekend
Set weekend
SET? until you see 'SET
Set weekend
Set weekend
Set weekend
I
I
Press YES and alter ON
I
Press YES and alter ON1
times in the same way.
I
Press YES and alter ON1
Press YES and alter ON1
times in the same way.
I
times in the same way.
I
Press YES and alter ON
times in the same way.
Set each day
Press YES and alter ON
times in the same way.
I
Set each day
times in the same way.
Set each day
I
If, after you've set OFF3
Set each day
I
If, after you've set OFF3
tune Saturday or Sunda
I
Set each day
If, after you've set OFF3
If, after you've set OFF3 f
tune Saturday or Sunday
I
Set each day
you want to adjust – the
tune Saturday or Sunday
I
If, after you've set OFF3
tune Saturday or Sunday
you want to adjust – the
time you wish. Press SE
If, after you've set OFF3
you want to adjust – then
tune Saturday or Sunda
you want to adjust – then
time you wish. Press SE
you press SET? after se
tune Saturday or Sunda
time you wish. Press SET
you want to adjust – the
time you wish. Press SET
you press SET? after set
grammer will go back t
you want to adjust – the
you press SET? after set
time you wish. Press SE
you press SET? after sett
grammer will go back to
time you wish. Press SE
grammer will go back to
you press SET? after se
grammer will go back to
you press SET? after se
grammer will go back to
grammer will go back to
I
If you don't want to alte
I
I
If you don't want to alter
until the programmer g
I
If you don't want to alter
If you don't want to alter
until the programmer go
I
until the programmer goe
I
If you don't want to alter
until the programmer goe
If you don't want to alter
until the programmer go
User's
until the programmer go
User's
User's
User's
PROG
User's
PROG
User's
PROG
PROG