Alen A375 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Очищувач повітря Alen A375. Alen A375 14 сторінок. Hepa
Також для Alen A375: Посібник користувача (7 сторінок), Посібник користувача (13 сторінок)

Друкувати сторінку

USING YOUR AIR PURIFIER

Operating Your Unit:

Plug your air purifier into a grounded outlet.

Press ON/OFF to start the air purifier. When your unit is on the control panel screen will

light up. To stop the air purifier press ON/OFF and the indicator light will turn off.

Press SPEED and watch the indicator numbers until desired fan speed is achieved.

Fan Speed

Level 1

Level 2

Level 3

Level 4

Auto

Press TIMER to have the air purifier automatically turn off in a set amount of hours.

Up to eight hours.

Press IONIZER to activate the ozone safe built in ionizer. The built-in IONIZER charges

particles in the air. This causes the particles to stick together and become larger, making

it easier for the filter and cleaners to trap. Press IONIZER again to turn off.

Filter replacement indicator — Light bar will progressively illuminate as filter collects

particles. There are two green, two yellow and one red bar. Each bar represents

approximately one month of continuous operation. Once all five bars are fully illuminated

(red being the last), it is time to change the filter.

After changing the filter, RESET the filter indicator by holding down TIMER while the unit

is ON until the clean indicator light disappears.

Press UV to activate the built-in ultraviolet lights. Press UV again to turn off.

When on AUTO fan speed, the unit will adjust fan speed based on the level of dust or

smell. Dust and smell bars adjust horizontally as their respective levels change.

Result

Quietest operation

Basic cleaning power

Moderate cleaning power

Maximum cleaning power

AUTO fan speed, the unit will adjust fan speed based

on the level of dust or smell. Auto begins on level 1 and

if triggered will clean at level 4.