Anchor LIBERTY PLATINUM Посібник користувача - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник користувача для Спікери Anchor LIBERTY PLATINUM. Anchor LIBERTY PLATINUM 7 сторінок. Liberty platinum sound system
Також для Anchor LIBERTY PLATINUM: Посібник користувача (8 сторінок), Посібник (2 сторінок), Посібник користувача (11 сторінок), Посібник користувача (4 сторінок), Посібник користувача (11 сторінок)
Друкувати сторінку
Liberty Platinum Sound System Owners Manual
BASIC SYSTEM OPERATION
NOTE: Fully Charge Batteries Before First Use!
1. Set all Input Levels to minimum & Tone Controls to flat
(middle) setting
2. Plug wired microphone into the MIC 1 or MIC 2 jacks
and/or any audio source into the LINE-IN jacks
3. Switch POWER to ON, Power ON LED will light
4. Slowly increase Level Controls for active Input Jacks
to desired volume
5. Adjust Tone Controls for desired sound quality
IMPORTANT: Make all connections with shielded cables to avoid
hum, buzzing or interference.
WIRELESS RECEIVER CONTROLS
UNIVERSAL MIC – INPUT JACKS
Balanced XLR – low impedance,
for balanced mic, powers
condenser-type microphones.
Unbalanced 1/4" – high
impedance, for unbalanced
microphones, no phantom power.
USB DC OUT - 5V 500mA
To charge/power external device
DC OUT - 12V 500mA
To charge/power external device
AC POWER CORD INLET
POWER SWITCH
MP3 PLAYER CONTROLS
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
BACK PANEL OF LIB-7500MU2
LINE IN – INPUT JACKS
1/8" (3.5 mm) jack is used to hook up a portable CD,iPOD,Laptop or other external audio source.
The 1/4" unbalanced and dual RCA Inputs can be used to daisy-chain multiple Liberty speakers.
MADE IN USA
SIX YEAR WARRANTY
MP3 VOLUME/LINE IN LEVEL CONTROL
TONE CONTROLS
BASS/TREBLE
LINE OUT – OUTPUT JACK
Balanced 1/4" and dual RCA provide a
combined output of all active system inputs.
Record your presetation or connect to
another powered sound system.
MIC LEVEL CONTROLS
VOICE OVER BUTTON
ON - Button In / Off - Button Out
CHARGE STATUS LEDS
GREEN: Charge Complete
AMBER: Nearly Complete
RED:
Charging has Begun
BATTERY EMPTY LED
RED: Charge Battery Immediately
POWER ON LED
GREEN:
Power On
SPEAKON OUTPUT JACK
2