Anchor MiniVox PB-25U1 Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для Спікери Anchor MiniVox PB-25U1. Anchor MiniVox PB-25U1 4 сторінки. Anchor pb-25t megaphone: brochure
Також для Anchor MiniVox PB-25U1: Технічні характеристики (1 сторінок), Технічні характеристики (2 сторінок)
Друкувати сторінку
DIVERSITY WIRELESS BY ANCHOR AUDIO
Anchor Audio UHF wireless is a 16 channel, diversity wireless system that utilizes two independent antennae to
receive signals. The diversity feature means the receiver will process the stronger of the two antenna signals, ef-
fectively minimizing dropouts and interference from other transmitting sources. The antennae are mounted in-
ternally so there are no obstructions or risk of damage.
CHANNEL SELECTION - BUILT-IN RECEIVER
Before you can use your UHF wireless system, you will need to select a wireless frequency, set the built-in receiver,
and microphone transmitter, to that channel.
1. Choose from any of the 16 available wireless channels
2. Set the wireless channel selector knob "CHANNEL" to the channel/frequency you have chosen
MINIVOX UHF WIRELESS
CONTROL PANEL
Model Shown: PB-25U1
NOTE: If you experience ongoing interference with your wireless system,
the selected frequency may be incompatible w/ other systems
in the area. Try different channels to find a clear frequency.
UHF WIRELESS ACCESSORIES
WH-6000: 16 channel wireless handheld microphone/transmitter
WB-6000: 16 channel wireless body-pack transmitter for hands free microphone
(microphone not included - see below)
CM-60:
Lightweight, low-profile collar microphone - works w/ the WB-6000 transmitter
EM-60T:
UltraLite "Over-the-Ear" hands free microphone - works w/ the WB-6000 transmitter
LM-60:
Lightweight, clip-on lapel microphone - works w/ the WB-6000 transmitter
6
HBM-60:
Ultra-lightweight headband microphone - works w/ the WB-6000 transmitter
UHF WIRELESS
CHANNEL SELECTION
RX INDICATOR LIGHTS
USING AN OUTBOARD CD/TAPE PLAYER
Use the CD/TAPE input jack to play pre-recorded material through the MiniVox. The MiniVox volume controls both
the audio source and microphone levels when used simultaneously.
1. Connect a mini-to-mini
patch cable (3.5mm
plugs) to the 'Line' or
'Headphone' output of
your audio source
2. Connect the other end
to the CD/TAPE input
jack on the MiniVox
control panel
3. Turn the MiniVox ON
and set the volume
control to about the
AUDIO SOURCE
2 o'clock position
HEADPHONE
4. Adjust the volume set-
OUTPUT JACK
ting of the audio source
to the desired level
RECHARGEABLE BATTERY KIT (OPTIONAL ACCESSORY)
For applications where the MiniVox PA system is used frequently, the RC-25 rechargeable battery kit is available. This
kit includes 9 rechargeable NiCad batteries and an AC charging adapter. When fully charged the batteries provide
approximately 6 hours of operation.
NOTE: New batteries must be charged for 24 hours prior to first use.
Using the RC-25 Recharge Kit
1. Install the 9 rechargeable NiCad batteries into the MiniVox
2. Insert the small charger plug into the Input Jack labeled
3. Plug the AC adapter into a power outlet for 12-18 hours to
Cycling the batteries
For extended battery life, we recommend you fully charge the batteries once
each month during periods of infrequent use.
RC-25 BATTERY KIT
Always fully recharge batteries before storing.
CAUTION: NEVER recharge other types of batteries. Doing so can result in battery
explosion. Use only rechargeable Nickel Cadmium (NiCad) batteries.
SHIELDED PATCH CABLE
MINIVOX CD/TAPE
INPUT JACK
(see page 4 - Battery Installation)
CHARGER on the MiniVox control panel
fully charge (24 hours max. charging time)
3