Dream Catcher ME1310 Посібник - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник для Антена Dream Catcher ME1310. Dream Catcher ME1310 18 сторінок. Antenna and propagation (3d) lab 1 introduction to 3d radiation pattern measurement
Друкувати сторінку3. Ensure that the antenna is located at 0 degrees by adjusting the knob as shown in Figure 7. Click
the Play button and a pop-up window will appear. If the antenna is already located at 0 degrees,
click Ok to proceed with the measurement. The ME1310 Rx unit will first rotate to 90 degrees,
and the AUT radiation pattern measurement at 0 degrees will then begin.
4. Once the measurement is completed, rotate the antenna to 10 degrees by adjusting the knob as
shown in Figure 8.
5. Click Next (in the pop-up window shown in Figure 9) and the ME1310 Rx unit will first rotate to
90 degrees, and the AUT radiation pattern measurement at 10 degrees will then begin.
ME1310 Antenna and
Propagation (3D)
Figure 7 – Initial angle of AUT
Rotate to
10º
Figure 8 – AUT Angle rotated to 10 degrees
http://dreamcatcher.asia/cw
Lab 1 - 9/18