Anchor RescueMAN Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Спікери Anchor RescueMAN. Anchor RescueMAN 6 сторінок.

RescueMAN Owners Manual

BATTERY INSTALLATION

1. Remove the battery compartment cover located

on the back of the RescueMAN by unscrewing the

thumbscrew

2. Slide out the battery pack from the RescueMAN

battery compartment

3. Insert ten 'AA' size batteries (alkaline or RC-30

rechargeable batteries) into the battery pack

Position the ten batteries into the battery pack by

following the polarity labels on the battery pack

4. Slide-in the battery pack into the battery

compartment and push the battery pack all the

way in

5. Replace the battery compartment cover and

tighten the thumbsrew

RECHARGEABLE BATTERY KIT (OPTIONAL ACCESSORY)

For applications where the RescueMAN PA system is used frequently, the RC-30 rechargeable battery

kit is available. This kit includes 10 rechargeable NiMH batteries and an AC charging adapter. When

fully charged the batteries provide approximately 12 hours of operation.

NOTE: New batteries must be charged for 6 hours prior to first use.

Using the RC-30 Recharge Kit

1. Install the 10 rechargeable NiMH batteries into the RescueMAN

(see above - Battery Installation)

2. Insert the charger plug into the Input Jack labeled DC IN on the RescueMAN control panel

3. Plug the AC adapter into a power outlet for 4-6 hours to fully charge

Cycling the Bbatteries

For extended battery life, we recommend you fully charge the batteries once each month during

periods of infrequent use. Always fully recharge batteries before storing.

CAUTION: NEVER recharge other types of batteries. Doing so can result in battery

explosion. Use only rechargeable Nickel-Metal Hydride (NiMH) batteries.

NOTE: System Can Be Used During Charging!

For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com

MADE IN USA

SIX YEAR WARRANTY

RC-30 Rechargeable Battery Kit