Anchor Navi-Trac Lite Інструкція з монтажу Посібник з монтажу - Сторінка 18

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Намет Anchor Navi-Trac Lite. Anchor Navi-Trac Lite 20 сторінок. Frame tent 30' wide system

Друкувати сторінку

Caution:

While standing beams, be sure to

"foot" the baseplate so that the beam does not slide out

from under the workers pushing it up.

After the first bay has been X-cabled, the installation

safety guys can be removed.

Gabled Ends are installed in the same way as the Hip-

Gabled units described above.

As before, be sure to guy out the frame before installing

fabric.

Note: To meet design loads, X-Cabled bays (upright

and rafter x-cables) shall be added such that there

are no more than 6 open bays between x-cabled

bays or hip ends. (see fig. 58)

30'

10'

CLEARSPANS UP TO 6 OPEN BAYS

APPENDIX #2

30' NAVI-TRAC LT CLEARSPAN

10'

(MAX)

80'

SINGLE OPPOSING

CABLES ON

OPPOSITE SIDES

OF BOTH END BAYS.

Additional

X-Cabled Bay

30'

10'

CLEARSPANS EXCEEDING 6 OPEN BAYS BETWEEN

UPRIGHT CABLED BAYS.

Maximum 6

open bays (no

x-cables)

10'

(MAX)

90'

X-CABLED UPRIGHT BAY

ADDED SO THERE ARE

NO MORE THAN 6 OPEN

BAYS BETWEEN UPRIGHT

CABLED BAYS.