Anchor Venue Series Інструкція з монтажу Посібник з монтажу - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Намет Anchor Venue Series. Anchor Venue Series 7 сторінок. Structures
Також для Anchor Venue Series: Інструкція з монтажу Посібник з монтажу (8 сторінок)
Друкувати сторінкуInstall Gable End Framing
Follow the instructions in the standard Venue installation manual except for 12M Structure.
The 12M will require an upright-rafter connecting bracket assembly attached to the Bodega Center
Rafter.
Upright-Rafter Connecting
Bracket fastens to bottom
rafter channels as shown.
Install Fabric Panels
Follow the instructions in the standard Venue installation manual except as follows.
Mids will be tensioned as shown.
Gable End has no lace. Pull in and over from one end and tension as shown.
View from underneath overhang at gable end.
Gable End Fabric
Tension bar installed in tension pocket
with tension strap at standard position.
6
Rafter
Inside View. Place
Bracket with connecting
bolts to inside of frame.
Install Intermediate Gable End upright
with Locking L-pin as shown in Figure
3.5b in standard Venue Installation
manual.
Threaded tensioner for
tensioning mid tension bar at
end of overhang.
Gable End Fabric
Tension bar installed in tension
pocket with tension strap at
standard position.
Figure 6
Mid Fabric