Anchor Beacon Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Акустична система Anchor Beacon. Anchor Beacon 7 сторінок. Anchor beacon line array battery-powered, portable line array sound system
Також для Anchor Beacon: Посібник користувача (4 сторінок), Посібник користувача (4 сторінок), Посібник користувача (10 сторінок), Посібник із швидкого старту (2 сторінок), Посібник із швидкого старту (2 сторінок), Посібник із швидкого старту (2 сторінок)

Beacon® Sound System Owners Manual

BEACON TRAVEL DOLLY

Beacon Portable sound systems are equipped with a

removable Travel Dolly which features wheels and a

retractable handle. To eliminate possible vibration from

effecting the performance of your unit, we recommended that

you remove the Travel Dolly before operating the system.

REMOVING TRAVEL DOLLY

1. Press & hold the spring-loaded Release

Pedal located on the Bottom Bracket

2. Swing the dolly bottom away from

the system

3. Lift Handle up to remove dolly from the

Top Bracket

Reverse steps to reattach the dolly

RETRACTABLE HANDLE

(CLOSED)

TOP BRACKET

RELEASE

PEDAL

BOTTOM BRACKET

For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com

CORRECT SYSTEM PLACEMENT

CONTROLLING FEEDBACK

Feedback, a howling noise or shrill sound, is self-generated by the sound system. It's caused by

a microphone picking up the sound coming from the speaker and then re-amplifying it. Once a

feedback loop starts, it continues until the system is adjusted.

FEEDBACK CAUSES

• Microphone too close, pointing towards

or in front of speaker

• Volume setting is too loud for room

• Sound reflecting off hard surfaces

AVOIDING & ELIMINATING FEEDBACK

• Point microphone in a different direction

• Keep microphone away from the speaker

• Place speaker in FRONT of the microphone

• Reduce the sound system volume levels

CAUTION: Feedback can damage your equipment & may be hazardous to hearing.

MADE IN USA

SIX YEAR WARRANTY

WRONG SYSTEM PLACEMENT