Anchor Beacon BEA-8000CU2 Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Акустична система Anchor Beacon BEA-8000CU2. Anchor Beacon BEA-8000CU2 13 сторінок.
Також для Anchor Beacon BEA-8000CU2: Посібник користувача (11 сторінок)
Друкувати сторінку
Beacon® Sound System Owners Manual
USING THE BUILT-IN AIR TRANSMITTER AND AIR WIRELESS COMPANION SPEAKER
1. Wireless Connection
Beacon Main Unit
1. Connect provided external antenna
2. Power on main unit
3. Power on AIR Companion Transmitter
4. Adjust volume knob on back panel
as needed
Beacon AIR Receiver Unit
1. Connect provided external antennas
2. Power on receiver unit
3. Power on AIR Companion Receiver(s)
4. Adjust volume knob on back panel as needed
NOTE: Verify both AIR Companion Transmitter
and AIR Companion Receiver(s) are synchronized
to the same channel. Default frequency setting
is 902.000. This can be changed as needed. See
Changing Frequency below.
Changing Frequencies on AIR Companion
Transmitter and AIR Companion Receiver(s)
- Using pointed edge tool, hold SET button for 2
seconds. Digital display will blink.
- Press UP or DOWN to select the desired frequency.
- Press SET, or wait 10 seconds for selection
to confirm.
Beacon Main Unit
3
4
Beacon AIR Receiver Unit
3
2
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
2. Connecting Systems with Assistive Listening Beltpack Receiver(s)
Quick System Setup Instruction – Beacon main unit with
AIR Companion Transmitter and ALB-9000
1. Follow instructions to set up AIR Companion Transmitter
1
2. Install 2 AA 1.5V batteries in beltpack
3. Extend antennas for maximum reception
4. Plug in headphones
5. Power on ALB-9000
6. Adjust volume as needed
NOTE: Verify both AIR Companion Transmitter
and ALB-9000 are synchronized to the same
channel. Default frequency setting is 902.000.
2
This can be changed as needed. See Changing
Frequency in Step 1.
1
4
MADE IN USA
SIX YEAR WARRANTY
4