Anchor BIG2-RU2 Посібник користувача - Сторінка 15
Переглянути онлайн або завантажити pdf Посібник користувача для Акустична система Anchor BIG2-RU2. Anchor BIG2-RU2 17 сторінок.
IMPORTANT SAFETY INSTRUCTIONS
General Warning or Caution
The Exclamation Symbol in the figure to the left appears in
Warning and Caution tables throughout this document. This
symbol designates an area where personal injury or damage
to the equipment is possible.
Electric Shock
The Electrical Shock Symbol in the figure to the left appears
throughout this manual. This symbol indicates a hazard
arising from dangerous voltage. Any mishandling could result
in irreparable damage to the equipment and personal injury
or death.
Protective Conductor Terminal
The Electrical Shock Symbol in the figure to the left appears
throughout this manual. This symbol indicates a hazard
arising from dangerous voltage. Any mishandling could result
in irreparable damage to the equipment and personal injury
or death.
European Union CE Mark European Union CE Mark
The presence of the CE Mark on Anchor Audio equipment
means that it has been designed, tested, and certified as
complying with all applicable European Union (CE) regula-
tions and recommendations.
Alternating Voltage Symbol
The alternating voltage symbol means that the unit can also
be used with AC (alternating current) that is in the form of
electric power from a wall socket.
Fuses
The fuse symbol in the figure to the left identifies the fuse
location on the Anchor Audio product. (Not required if not
user replaceable)
On Symbol
The On Symbol in the figure to the left represents a power
switch position on the Anchor Audio product. This symbol
represents a Power On condition.
Waste Electrical and Electronic Equipment (WEEE)
This symbol on the product or on its packaging indicates that
this product must not be disposed of with regular waste.
Instead, it is the user's responsibility to dispose of waste
equipment according to the local laws. The separate collec-
tion and recycling of the waste equipment at the time of
disposal will help to conserve natural resources and ensure
that it is recycled in a manner that protects human health
and the environment. For information about where the
user can drop off the waste equipment for recycling, please
contact your local authority for recycling advice.
Inspection for Damage
Anchor Audio products are carefully packaged at the factory
to minimize the possibility of damage during shipping.
Inspect the box for external signs of damage or mishandling.
Inspect the contents for damage. If there is visible damage
to the instrument upon receipt, inform the shipping company
and Anchor Audio immediately.
Electrical Requirements
Before attempting to power up the unit for the first time, the
following precautions must be followed:
Have a qualified electrician verify the wall socket that will be
used is properly polarized and properly grounded.
Warning: To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture, apparatus shall not
be exposed to dripping or splashing and no objects filled with
liquids, such as vases or cups, shall be placed on the apparatus.
The apparatus should be connected to a main socket outlet
with a protective earthing connection. For Nordic markings
refer to copy of marking label.
The plug in the power cord is the AC mains disconnected device
and must remain readily operable.
There should be a minimum distance around the apparatus for
sufficient ventilation. The ventilation should not be impeded by
covering the ventilation openings with items, such as newspa-
pers, table-cloths, curtains, etc.; no naked flame sources, such
as lighted candles, should be placed on the apparatus.
Equipment may be located above or below this apparatus, but
some equipment (like large amplifiers) may cause an unac-
ceptable amount of hum or may generate too much heat and
degrade the performance of this apparatus.
WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov.
15
Inspection for Damage
Do not attempt to operate this equipment
if there is evidence of shipping damage or
you suspect the unit is damaged. Damaged
equipment may present additional hazards
to you. Contact Anchor Audio Technical
Support for advice before attempting to
plug in and operate damaged equipment.
Anchor Audio Technical Support:
800.262.4671 x782
WARNING
To avoid electric shock, connect the instru-
ment to properly earth-grounded, 3-prong
receptacles only. Failure to observe this
precaution can result in severe injury.