Anchor BIG2-XU2 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Акустична система Anchor BIG2-XU2. Anchor BIG2-XU2 17 сторінок.

OPERATING THE BLUETOOTH

Turn on the Bluetooth using the volume knob. You will hear it make a boot up sound. Below is the legend for the what

the different LED light signals mean:

• No light – Bluetooth is off or it is in sleep mode and cannot connect

• Blinking light – Pairing mode

• Solid light – Device is connected

Press the pairing button and the blue LED will blink. Bluetooth will enter sleep mode after 90 seconds if idle

and unpaired.

If discoverable during pairing mode, choose 'Anchor Audio' from selection list on your mobile device.

When the device has successfully connected to the Bluetooth, the Bluetooth module will beep to signify connection and

the blue LED will become solid.

Now you can play audio from your Bluetooth device to the Anchor Audio portable sound system. You can adjust volume

by using the Bluetooth module's knob, as well as the volume control on your device.

NOTE: If a previously paired device is in range and discoverable, the unit should automatically make a connection, however, this may

depend on your individual device. All Anchor Audio portable sound system Bluetooth connections are named 'Anchor Audio' . If you are

using multiple systems, be sure to keep track of each connection.

FREQUENTLY ASKED QUESTIONS

What is the range of Anchor Audio Bluetooth?

The Anchor Audio Bluetooth range is 100 ft. line of sight.

My Sound System is auto-connecting to a device, but I don't know which one. Can I disconnect directly from the Sound System?

Yes, if your unit is auto-connecting to a device that you cannot identify (because for example, you're in a room with other people who have

connected to the unit in the past), you may need to manually disconnect that pair from the Sound System itself. Just hold the 'pairing' button

for two seconds, and the Sound System will disconnect from the device it is currently connected to, and immediately go into pairing mode.

What kind of modes can my phone be in that allow the Bluetooth connection to still work?

Bluetooth will work in modes such as Airplane mode and Do Not Disturb (or the equivalent). Just be sure to still have your Bluetooth setting

turned on. To simplify the process, put your phone in the desired mode first, and then secure the Bluetooth connection, as moving into these

modes may cause disconnection.

What happens if I get a phone call?

Incoming and outgoing calls should pause the audio stream. The audio from the call should not be transmitted via Bluetooth. To avoid inter-

rupting audio, set device in Airplane mode, then enable Bluetooth, ensure your connected, and you will not encounter any interruptions in your

audio stream.

*Bluetooth connection and behavior may depend on your individual device settings and capabilities, all testing was done using an Apple iPhone.

VOLUME/POWER KNOB

INDICATOR LIGHTS

PAIRING BUTTON